PM5715 脉冲函数发生器产地： Fluke （福禄克公司）型号：PM5715

点击查看大图

产品价格： < 面议

产品型号：产地： Fluke （福禄克公司）型号：PM5715

品牌：

公司名称：珠海市安规测试设备有限公司

所在地：广东珠海

浏览次数：2333 次

立即询价在线咨询

产品简介

厂商名称：  Fluke Corporation（福禄克公司）  
产品型号：  PM5715  
产品类别：  函数信号发生器  
产品类型：  手持

产品详细信息

产品简介：

特点
·频率范围1Hz~50MHz
·上升/下降时间：6ns~500ms变量
·幅度范围：0.2V~10V
·直流偏移量：-2.5V~+2.5V
·手动设备及外部触发、门、脉冲成型
·脉冲模式：单/双
技术指标
·Technical specifications
·Time parmeters
·Pulse repetition time:20ns to 1s(1Hz to 50MHz)
·Pulse delay:10ns to 100ms
·Pulse duration:10ns to 100ms
·Duty factor:0.00000001 to 0.99999999(high duty factors require inverted mode)
·Main output pulse characteristics
·Pulse amplitude:0.2V to 10V at Z=50Ω
·Source impedance
·10V range:Current source
·5V and lower ranges:50Ω
·Polarity
·PM5712:+only.Pulses within-5Vto +10V
·possible,using DC offset and normal or inverted
·Transition times
·Corresponding to 10 to 90% of pulse ampitude,at amplitudes of ≥5Vand Z=50Ω
·continuous control of rese-and fall-times
·within each of 6 ranges.
·PM5712:4ns fixed
·DCoffset at Z=50Ω
·PM5712:-5V to +2V
·Max outout voltage:Pulse amplitude and dc offset max.+10V
·Waveform aberrations:<±5% of set amplitude
·Pulse modes:
·Single pulse(delayable)
·Double pulse
·T/2,50%duty cycle,50±20%dutycycle in 20ns and 100ns repetition range
·Logic mode:Normal or inverted
·Output protection:Short or open circuit safe
·Auxiliary pulse output characteristics
·Pulse amplitude:+2.5V into 50Ω or +4.5V open circuit,TTL-compatible
·Source impedance:50Ω
·Pulse waveforms:Single pulse in single and T/2 pulse modes.Double pulse in double pulse mode.
·Pulse advance:Approx.12ns ahead of main single or double pulses
·Oputut protection:Short or open circuit safe
·Internal clock output(sync.output)
·Function:Pre-trigger output,mian output pulse is delayable with respect to sync. output
·Amplitude:+1.5V at Z=50,+3V open circuit
·Source impedance:50Ω
·Pulse advance:Approx 40ns ahead of main single pulse with pulse delay set to 10ns
·Output rotection:Short or open circuit safe
·External operating modes
·TRIGG:Each input pulse,generates an output pulse
·GATE:Synchronous gating.Input signal disables output pulses
·DURATION:Pulse mode T/2gives output pulses with same duration and retetition rate as external input signal,other waveform parameters are set via the generator
·MANUAL:Single shot push button simulate external signal for triggering,gating and duration
·External input
·Function:For xeternal trigger,gate and duration
·Range:DC to 50MHz
·Coupling:DC
·Input impedance:Approx.220Ωat <1.5V,approx.800Ωat >1.5V
·Trigger level:≤+1V
·Trigger slope:Positive
·Pulse delay:Approx.50ns from input to main single pulse with delay set to 10ns
·Max.input voltage without damage:±12V
·General specifications
·Power requirements
·Line:100,115,200or 230V±15%
·Line frequency:50to 400Hz
·Power consumption:70VA
·Environmental conditions
·Temperature range
·Operating:0to 40℃
·Storage:-40℃to 70℃
·Safety:According to CE-regulation 73/23
·EN61010-1 CAT II,POllution Degree2
·EMC:Accordingto CE regulation 89/336:
/emission according to EN 550081-1,EN55022,Class BEN60555-2.Immunity according to EN 50082-1,inclusive IEC 80-2,-3,-4,-5.
·Mechanical specifications
·Size:210mmW×130mmH×275mmL(8.3in W×5inH10.8inL)
·Weight:4kg(8.8lb)
·Included with instrument:Manual,power cord
订货信息

Model Name	Product Description
PM 5715/11	Pulse Generator

Model Name	Accessory or Option Description
PM 5715	Service Manual
PM 9571/01	50Ω Feedthrough termination 3W
PM 9584/02	50Ω T-piece matched power-splitter
PM 9585/01	50ΩFeedthrough Termination,1W
PM 9588/01	50Ω BNC-BNC cable set (50.2m,40.4m,30.6m,32m)regular cables