TCP0150交直流电流探头 TCP0150
产品简介
TCP0150交/直流电流探头 产品特点 容易进行高精度AC/DC电流测量,操作简便,直流电流精度典型值≤1%; 带宽DC~20MHz,电流从±5mA到150A有效值,可满足大电流和小电流测试需要; 具有自动匹配刻度单元,并在示波器显示屏上读出; 在ATE设备通过GPIB接口可进行远程编程; 容易退磁和自动归零。 适用示波器型号:DPO4032、DPO4034、DPO4054、DPO4104M
产品详细信息
TCP0150交/直流电流探头
产品特点
容易进行高精度AC/DC电流测量,操作简便,直流电流精度典型值≤1%;
带宽DC~20MHz,电流从±5mA到150A有效值,可满足大电流和小电流测试需要;
具有自动匹配刻度单元,并在示波器显示屏上读出;
在ATE设备通过GPIB接口可进行远程编程;
容易退磁和自动归零。
适用示波器型号:DPO4032、DPO4034、DPO4054、DPO4104
MSO4032、MSO4034、MSO4054、MSO4104
部分DPO7000系列示波器。
Features & Benefits
Easy to Use and Accurate AC/DC CurrentMeasurements
Connects Directly to DPO4000, MSO4000 and DPO7000 SeriesOscilloscopes Using the TekVPI Probe Interface
DC to 20 MHz Bandwidth
150 A RMS Maximum Current Capability
500 A Peak Pulse Current Capability
High Accuracy with Typically Less than 1% DC Gain Error
Accurately Measures Current levels as low as 5 mA
Low Noise and DC Drift
Provides Automatic Units Scaling and Readout on the Oscilloscope'sDisplay
Remote Programmable GPIB Control for ATE systems
Split-Core Probe Head Construction Allows Easy Connection toConductors
Easy to Degauss and Autozero
Setup Controls and Probe Status and Diagnostic Indicators areProvided on Both the Probe Hardware and via an Easy-to-Access ScopeUI Display Menu
Applications
Power Supplies
Semiconductor Devices
Power Inverters/Converters
Electronic Ballasts
Industrial/Consumer Electronics
Motor Drives
Transportation Systems
Note: Requires DPO7000SeriesFirmware Version 3.0.2 or greater. Requires DPO4000/MSO4000Firmware Version 2.06 or greater.
TCP0150 is a high performance and easy-to-use 150A AC/DC current probe designed for use and direct connection(without the need of an additional power supply) to the TekVPI™probe interface used on Tektronix DPO4000, MSO4000 and DPO7000Series oscilloscopes. This AC/DC current measurement probe provides20 MHz of frequency bandwidth with selectable range control for 25A and 150 A measurement ranges. It also provides low currentmeasurement capability and accuracy to current levels as low as 5mA per division — important for achieving broad dynamic currentrange of high-level and low-level measurement signals.
Characteristics
Warranted
Bandwidth | DC to ≥20 MHz (-3dB).Derate with Frequency. See Figure 1. (Calculated from Rise Time BW= .35/Rise Time) |
Rise Time | ≤17.5 ns |
Max RMS Current | 150 A |
Max Peak Pulse Current | 500 A |
Minimum Sensitivity | 5 mA (on oscilloscope’s1 mV/div setting) AC Coupling (on oscilloscopes that support AC/DCcoupling) |
Current Ranges | 25 A and150 A |
Max Bare Wire Voltage | 600 VRMS CAT I& II 300 VRMS CATIII |
Typical
DC Accuracy | ±1% Typical 3% Warranted |
Max Amp-SecondProduct | |
25 ARange | 3,000 AµS |
150 ARange | 15,000 AµS |
Insertion Impedance | 0.03 Ω @ 1 MHz |
0.075 Ω @ 5 MHz | |
.125 @ 10 MHz | |
.3 @ 20 MHz | |
SignalDelay | 21 ns |
Displayed RMSNoise | ≤500 μARMS (probeonly) |
Environmental
Temperature | |
Operating | 0ºC to +50ºC |
Non-operating | -40ºC to +75ºC |
Humidity | |
Operating | 5% to 95% RH (RelativeHumidity) at up to +30ºC 5% to 85% RH above 30ºC up to +50ºC,non-condensing |
Non-operating | 5% to 95% RH (RelativeHumidity) at up to +30ºC 5% to 85% RH above 30ºC up to +75ºC,non-condensing |
Altitude | |
Operating | Up to 2,000 meters (6,560feet) |
Non-operating | Up to 12,000 meters(40,000 feet) |
Physical Characteristics
kg | lbs | |
Shipping Weight | .7865 | 1.734 |
Dimensions | meters | inches |
Cable Length | 2 meters | 79 inches |
Probe head size | ||
Length | 26.8 cm | 10.55 in. |
Width | 4.1 cm | 1.6 in. |
Height | 15.6 cm | 6.13 in. |
Max Conductor Diameter | 21 mm x 25 mm | 0.83 in. x1.0 in. |
Power Requirements | TCP0150 is powereddirectly by the DPO4000, MSO4000 and DPO7000 Series oscilloscopesusing TekVPI interface |
Recommended Oscilloscopes
DPO4000, MSO4000, and DPO7000 Series oscilloscopes with TekVPIprobe interface.
Note: Requires DPO7000Series Firmware Version 3.0.2 or greater.Requires DPO4000/MSO4000 Firmware Version 2.06 orgreater.
Figure 3: Do not apply currents greater than themax continous current for more than 10 seconds to minimize heatingeffects.
AC/DC Current Probe with TekVPI Interface.
Includes: Protective Cover (016-1924-xx), andCertificate of Traceable Calibration and Data Standard.
Option | Order |
---|---|
Option L0 | Standard EnglishLanguage Instruction Manual (071-xxxx-xx) |
Option L5 | SubstitutesJapanese Language Instruction Manual |
Option L7 | SubstitutesSimplified Chinese Language Instruction Manual |
Recommended Accessories
Accessory | Order |
---|---|
Current Loop, 1 Turn,50 Ω with BNC connector used for PerformanceVerification | 015-0601-50 |
TekVPI CalibrationFixture | 067-1701-xx |
Cal/Deskew Fixture forDPO7000/70000 Series | 067-1686-xx |
Service Options
Option | Description |
---|---|
Opt. CA1 | Provides coveragefor a single Calibration Event |
Opt. C3 | Calibration Service 3 years |
Opt. C5 | CalibrationService 5 years |
Opt. D3 | Calibration DataReport 3 Years (with Opt. C3) |
Opt. D5 | Calibration DataReport 5 Years (with Opt. C5) |
Opt. R3 | Repair Service 3Years |
Opt. R5 | Repair Service 5Years |