道路测量仪 MP30 ROAD
产品简介
耐用的ISOSCPOPE® MP30 Road道路测量仪操作简便。通过涡流探头，以及埋在路面里的测量反射块测量路面的厚度。ISOSCOPE® MP30 Road 可以被放置在一个带书写控制台的小推车上的便携箱内。以及可以连接一个头戴式耳机以便在嘈杂的使用环境中听清测量数据被记录下的确认声。
产品详细信息
ISOSCOPE® MP30 Road道路测量仪可以存储100个测量应用中的多达1,000数据组的10,000个测量数据。配备有一个独特的和便于读取的60 x 30 mm （2.4" x 1.2"）液晶显示器。大量显示的信息使得操作异常简便，包括单个测量读数，测量次数，应用程式号，组号，统计数据，Cp和 Cpk，产品规格限制超出，日期，时间，以及显示操作模式和设置的图标和符号，2行文本各16个字母或可自由选择的符号以用于显示数据和操作员提示。 ISOSCOPE®MP30可以打印矩阵图，正态分布图，以及Cp和Cpk指标。
应用程式特定的校准参数储存在测量探头中，因此仪器一旦连接了任何探头都能立即进行测量。
延伸版本
ISOSCOPE® MP30-BIT
ISOSCOPE® MP30 Road仪器不带手推车。
Technical Data ISOSCOPE® MP30 ROAD
Instrument type Coating thickness measuring instrument for road pavement
Specimens All pavements made of asphalt or rock materials that are typically used in road construction, even
with ferromagnetic properties (due to a magnetite content)
Order number 603-140
Overall dimensions Height 1180 mm (46.5“); width 810 mm (31.9“); length 1150 mm (45.3“)
Total weight Ready to ship: about 25 kg (55 lbs)
Measurement probe Type ET280: Order no. 603-302; eddy-current method DIN EN ISO 2360
Measurement range 1 – 30 cm (1.2 - 12“)
Probe dimensions Height 205 mm (8“); diameter 300 mm (11.8“); cable length 1.5 m (5 ft)
Corrective calibration With corrective calibration standard set: Order number 603-081
Correction standard 1: Height 5 cm (2“)
Correction standard 2: Height 15 cm (6“)
Aluminum base 1.5 mm (0.06“) thick
Reflector Al self-adhesive foil 30 x 70 cm (12 - 28“) according to standard content of shipment.
The instrument can be calibrated to 6 additional reflector sizes. Depending on the reflector size,
the master calibration standard set (order number 603-080) will be required additionally.
Trueness 0 to 10 cm (0“ to 4“):0.05 cm (0.01“)
10 to 30 cm (4“ to 12“) : to 0.5 % of the reading
Ambient temperature + 5 °C to + 40 °C (41 ... 104 °F)
Power supply 9 V block battery or 9 V NiCd battery or
Plug-in type AC adapter (12 V 30 mA) 220 V or 110 V
Additional performance • Digital measurement reading on large LC display with operator instructions
features ISOSCOPE® MP30 • Acoustic signal for localizing the reflector; head receiver available
• Analog bar display with freely selectable limit values for localizing the reflector
• Same measurement sensitivity for reflector search and coating thickness measurement, thus, no
toggling required
• RS232 interface for data transfer
• Measurement cart can be folded up for transportation in a car
Memory capacity A maximum of 10,000 measurements can be stored in up to 100 applications
Content of shipment Foldable measurement cart II; ISOSCOPE® MP30; operator’s manual; ET280 probe with heavy
ISOSCOPE® MP30 ROAD canvas bag for transport and storage; probe strap, Adapter ET280, cable between probe and
instrument, carrying case NA; 1 roll aluminum reflector foil; among others
Accessories Calibration standard set for the calibration: Order no. 603-081
Master calibration standard set: Order no. 603-080
Data printer FMP3040: Order no.602-890
Carrying box MP: Order no. 602-891
Head receiver MP30/40-H: Order no. 602-521
Spare parts Adapter ET280: Order number 603-142
Probe cable T280: Order number 603-144
NiCd battery 9V: Order number 600-225
Plug-in type charger for the NiCd battery: Order number 600-226
Consumables Aluminum self-adhesive foil as reflector, width 30 cm (12“), length 50 m (164 ft),
Order no. 600-322
Printer paper FMP3040/F2000 VE (10 rolls); Order no. 600-410
应用程式特定的校准参数储存在测量探头中，因此仪器一旦连接了任何探头都能立即进行测量。
延伸版本
ISOSCOPE® MP30-BIT
ISOSCOPE® MP30 Road仪器不带手推车。
Technical Data ISOSCOPE® MP30 ROAD
Instrument type Coating thickness measuring instrument for road pavement
Specimens All pavements made of asphalt or rock materials that are typically used in road construction, even
with ferromagnetic properties (due to a magnetite content)
Order number 603-140
Overall dimensions Height 1180 mm (46.5“); width 810 mm (31.9“); length 1150 mm (45.3“)
Total weight Ready to ship: about 25 kg (55 lbs)
Measurement probe Type ET280: Order no. 603-302; eddy-current method DIN EN ISO 2360
Measurement range 1 – 30 cm (1.2 - 12“)
Probe dimensions Height 205 mm (8“); diameter 300 mm (11.8“); cable length 1.5 m (5 ft)
Corrective calibration With corrective calibration standard set: Order number 603-081
Correction standard 1: Height 5 cm (2“)
Correction standard 2: Height 15 cm (6“)
Aluminum base 1.5 mm (0.06“) thick
Reflector Al self-adhesive foil 30 x 70 cm (12 - 28“) according to standard content of shipment.
The instrument can be calibrated to 6 additional reflector sizes. Depending on the reflector size,
the master calibration standard set (order number 603-080) will be required additionally.
Trueness 0 to 10 cm (0“ to 4“):0.05 cm (0.01“)
10 to 30 cm (4“ to 12“) : to 0.5 % of the reading
Ambient temperature + 5 °C to + 40 °C (41 ... 104 °F)
Power supply 9 V block battery or 9 V NiCd battery or
Plug-in type AC adapter (12 V 30 mA) 220 V or 110 V
Additional performance • Digital measurement reading on large LC display with operator instructions
features ISOSCOPE® MP30 • Acoustic signal for localizing the reflector; head receiver available
• Analog bar display with freely selectable limit values for localizing the reflector
• Same measurement sensitivity for reflector search and coating thickness measurement, thus, no
toggling required
• RS232 interface for data transfer
• Measurement cart can be folded up for transportation in a car
Memory capacity A maximum of 10,000 measurements can be stored in up to 100 applications
Content of shipment Foldable measurement cart II; ISOSCOPE® MP30; operator’s manual; ET280 probe with heavy
ISOSCOPE® MP30 ROAD canvas bag for transport and storage; probe strap, Adapter ET280, cable between probe and
instrument, carrying case NA; 1 roll aluminum reflector foil; among others
Accessories Calibration standard set for the calibration: Order no. 603-081
Master calibration standard set: Order no. 603-080
Data printer FMP3040: Order no.602-890
Carrying box MP: Order no. 602-891
Head receiver MP30/40-H: Order no. 602-521
Spare parts Adapter ET280: Order number 603-142
Probe cable T280: Order number 603-144
NiCd battery 9V: Order number 600-225
Plug-in type charger for the NiCd battery: Order number 600-226
Consumables Aluminum self-adhesive foil as reflector, width 30 cm (12“), length 50 m (164 ft),
Order no. 600-322
Printer paper FMP3040/F2000 VE (10 rolls); Order no. 600-410
关于我们|
易展动态|
易展荣誉|
易展服务|
易家文化|
英才集结号|
社会责任|
联系我们
备案号：粤ICP备11010883号|
公安机关备案号：44040202000312|
版权问题及信息删除： 0756-2183556
QQ：
Copyright?2004-2017 珠海市金信桥网络科技有限公司 版权所有
