泵杆FLUX F430PP-40/33

产品价格: < 面议
产品型号:F430PP-40/33
 牌:德国FLUX|插桶泵
公司名称:上海祁立环保设备有限公司
  地:上海闵行
浏览次数:
更多
立即询价 在线咨询

产品简介

泵杆FLUX用于抽送酸、碱溶液的轻便手提桶泵。桶泵适用于稀的、中性的、腐浊性液体。FLUX桶泵适用于输送液体的范围 :醋酸、阿摩尼亚( 氨) 、铬酸、甲酸、液体肥料、果酸、氢氟酸、硝酸、磷酸、氢氧化钾、苏打水、硫酸。

产品详细信息

泵杆FLUX
泵杆型号:
F430PP-40/33

FLUX barrel pumps in polypropylene are used for both,
chemically aggressive and low flammability liquids such as acids
and alkalis,together with most thin and neutral liquids.

when using the pump with a discharge hose(of approx.2m)and a hand tap,
the delivery rate will be approx.70L/min.
Depending on the motor type a 200L barrel can be emptied within 3-4 munutes.

泵杆FLUX用于抽送酸、碱溶液的轻便手提桶泵。适用于稀的、中性的、腐浊性液体。

桶泵适用于输送液体的范围 :醋酸、阿摩尼亚() 、铬酸、甲酸、液体肥料、果酸、氢氟酸、硝酸、磷酸、氢氧化钾、苏打水、硫酸。
*高流量(无压头)80 -180L/M
*高扬程(流量为0
6-17m
粘度*高至
800mPas(cP)
泵型及标准 带有机械密封 , PP,PVDF, 铝合金 , 不锈钢和鎳基合金材质产品可提供选择

材质 铝合金 (AL), 不锈钢 316L/316Ti(S), 鎳基合金 (HC), 聚丙烯 (PP), 聚偏二氟乙烯(PVDF)
密封材质 机械密封 . 材质用氧化陶瓷 ,PTFE/ ,O 型圈用 FPM( 氟橡胶 ),NBR( 丁晴橡胶 ) EPDM( 三元橡胶 )
泵管外径 40-100mm, 取决于泵的材质和输出要求 .
浸入深度
标准长度:700,1000,1200mm
特殊长度:500,1500,1800,2000,2500,3000mm,其它长度可以定做.
其它版本和长度F430PP-100/50:1000,1200,1500mm

电机 :整流电机450W;附开/关及超负荷保护系统.可带或不带电子转速调节装置.
防护等级标准:双层绝缘防护等级Ⅱ,IP24防溅,抗无线电干扰.安规标准:VDE,GS,CSA,SEV
电压 :240,230, 110,100V,50或60HZ

重量 3.5-6 Kg

FLUX barrel pumps in polypropylene are used for both,
chemically aggressive and low flammability liquids such as acids
and alkalis,together with most thin and neutral liquids.

when using the pump with a discharge hose(of approx.2m)and a hand tap,
the delivery rate will be approx.70L/min.
Depending on the motor type a 200L barrel can be emptied within 3-4 munutes.

在线询价

您好,欢迎询价!我们将会尽快与您联系,谢谢!
  • *产品名称:
  • 采购数量:
  • 询价有效期:
  • *详细说明:
  •   100
  • *联系人:
  • *联系电话:
  • 附件: 附件支持RAR,JPG,PNG格式,大小在2M范围
验证码: 点击换一张
 
   温馨提示:为规避购买风险,建议您在购买前务必确认供应商资质与产品质量。

   免责申明:以上内容为注册会员自行发布,若信息的真实性、合法性存在争议,平台将会监督协助处理,欢迎举报
产品标签