salt spray tester/salt frog/盐雾The JST Series Salt Spray Tester offer the most realistic anddependable corrosion test, it is widely used to test components andcoated panels for corrosion resistance throughout the automotive,paint, surface coating, chemical, aerospace, electronic, offshoreand defense industries. |
| |
| salt spray tester/salt frog/盐雾 Specification : |
| Model | jST-160 | JST-090 | JST-060 | Dimension | Interior (W×H×D,㎜) | Close type, ultraviolet arc discharge | 900×600×500 | 600×500×470 | Exterior (W×D H,㎜) | 2200×950×1500 | 1460×910×1280 | 1130×630×1070 | Temperature Range | 35~50℃ | Heater | 15KW+1KW | 7KW+0.75KW | 3KW+0.75KW | Air compressor | 2HP | 1/2HP | 1/2HP | Volume | 800 | 270 | 60 | Power Requirements | AC 1Ø 220V 50 /60HZ |
|
| |
| (1)salt spray tester/salt frog/盐雾 Corrosion Testing Mode:
a. Neutral Salt Spray Test ( NSS ) b. Acetic Acid Salt Spray Test ( AASS ) c. Copper Accelerated Acetic Acid Salt Spray Test ( CASS ) |
|
| |
| (2) Test Temperature :
a. Testing zone:35℃ ~ 50℃ ±1.0℃ b. Saturated Air Cask: 47℃ ~ 63℃ ±1℃ |
|
| |
| (3) Test Pressure : 1.0 Kg/㎝2±0.01 Kg/㎝2 |