DGL XY 双线性导轨悬臂工作台 AUM4-S4
产品简介
设计特征 A.直接驱动无铁直线电机定位系统 B.运动和归航 C.悬臂设计 DGLXY双线导轨悬臂工作台由Akribis的标准DGL系列模块构成,具有很高的刚度和定位精度
产品详细信息
设计特征
A.直接驱动无铁直线电机定位系统
B.运动和归航
C.悬臂设计
DGLXY双线导轨悬臂工作台由Akribis的标准DGL系列模块构成,具有很高的刚度和定位精度
Module Configuration
MODEL | Axis | Motor |
Effective Stroke (mm) |
Total Moving Mass (Kg) | Total Mass (Kg) | Sensor Position (mm) | Hard Stopper Position (mm) |
DGL180 | Top | AUM3-S2 | 200-300 | Ref to Table 2 | Ref to Tabel 3 | Stroke+4 | Stroke+20 |
AUM3-S3 | |||||||
AUM3-S4 | |||||||
DGL200 | Bottom | AUM4-S2 | 200-600 | A | B | Stroke+4 | Stroke+20 |
AUM4-S3 | |||||||
AUM4-S4 |
A = Table 2 (Bottom Axis) + Table 3 + 6.12 (Interface Mass, Kg)
B = A + Table 4
Axis Moving Mass
Carriage Size | S2 | S3 | S4 |
Top Axis | 2 | 2.5 | 2.7 |
Bottom Axis | 2.4 | 3.1 | 3.4 |
Total Mass for Top Axis
Effective Stroke/Top Axis Mass (g) | 200 | 300 |
Motor Coil Size S2 | 17.04 | 20.44 |
Motor Coil Size S3 | 18.26 | 22.94 |
Motor Coil Size S4 | 20.74 | 23.24 |
Total Mass for Bottom Axis
Effective Stroke/Bottom Axis Mass (g) | 200 | 300 | 400 | 500 | 600 |
Motor Coil Size S2 | 16.4 | 19.8 | 22.3 | 25.7 | 29.1 |
Motor Coil Size S3 | 18.9 | 22.3 | 24.9 | 28.3 | 31.7 |
Motor Coil Size S4 | 20.1 | 22.6 | 26.1 | 29.5 | 32 |
Performance Parameter
Specification Parameter | Unit | DGL180 | DGL200 |
1Straightness | μm | ±3μm/25mm | ±3μm/25mm |
NTE±10μm/300mm | NTE±10μm/300mm | ||
1Flatness | ±3μm/25mm | ±3μm/25mm | |
NTE±10μm/300mm | NTE±10μm/300mm | ||
Repeatability (1μm resolution) | ±3μm (40μm scale pitch) | ±3μm (40μm scale pitch) | |
Repeatability (0.5μm resolution) | ±1.5μm (20μm scale pitch) | ±1.5μm (20μm scale pitch) | |
Repeatability (0.1μm resolution) | ±1μm (20μm scale pitch) | ±1μm (20μm scale pitch) | |
Repeatability (Analogue) | ±5 counts | ±5 counts | |
X-Y Orthogonality | Arc-sec | 10 | 10 |
Note: All measurement taken when module is mounted on a 5 micron flat granite table.
1.Motor cable is the length of cable measured after the bottom axis carriage.