Buehler镶嵌机 SimpliMet 3000型

点击查看大图

产品价格： < 面议

产品型号：SimpliMet 3000型

品牌：标乐&威尔逊

公司名称：宁波金领仪器设备有限公司

所在地：浙江宁波

浏览次数：1440 次

立即询价在线咨询

产品简介

Buehler镶嵌机SimpliMet  3000型适用于具有多种镶嵌样需求的实验室用户。
Buehler镶嵌机SimpliMet  3000型采用预编程记录各种镶嵌方法，可对不同尺寸的镶嵌样进行重复制作。

Buehler镶嵌机SimpliMet 3000型产品特点：

· 适用于有多种镶嵌样需求且镶嵌尺寸不同的实验室。

· 存储和撤销5种不同的程序，降低复杂性和消除错误，提供灵活性来满足多变的实验室要求

通过选择不同尺寸的模具来优化各种各样的试样大小。节约镶嵌介质并提升镶嵌质量

Buehler镶嵌机SimpliMet 3000型产品技术规格：

Specifications
Operation	Automatic electro-hydraulic
Power Source	85-264VAC, 50/60Hz, 1 phase
Molding Pressure	1200 - 4400psi [80 - 300bar] in 100psi [5bar] increments
Molding Temperature	120 - 360°F [50 - 80°C] in 20°F [10°C] increments
Heating Power	1500Watt @ 115/230VAC
Heating Time	0 - 20 minutes in 10 second increments
Cooling Time	0 - 30 minutes in 10 second increments
Mold Type	Cylindrical, including upper and lower rams and duplex mold spacer
Closure Type	Insluated bayonet with piston indent
Mold Diameters	1in, 1.25in, 1.5in, 2in, 25mm, 30mm, 40mm, 50mm
Touch-pad Controls	On/Off; Heat Time; Cool Time; Molding Temperature; Molding Pressure; Mold Size; Ram Up/Down; Maunal Cool; Cycle Start; Cylinder Open; Unit of Measure; Language and also including Thermoplastic; Load and Save Methods
Units of Measure	Imperial or Metric
Water Flow Rate	0.5gal/min [2ℓ/min] minimum
Water Pressure	45-75psi [3-5bar]
Control Voltage	24VDC
Method Programmability	4 Buehler, Preprogrammed Methods per mold size; 25 User Definable Methods
Preload Pressure	0 - 400psi [0 - 30bar] in 50psi [5bar] increments
Thermoplastic Function	Automatically sets correct parameters for thermoplastic resins such as TransOptic™ and cools the mount in a controlled, linear fashion
Compliance	In accordance with EC Directives