Harvard PHD Hpsi 22/2000 精密高压注射泵 Harvard PHD Hpsi 22/2000

点击查看大图

产品价格： < 面议

产品型号：Harvard PHD Hpsi 22/2000

品牌��

公司名称：生命科学仪器

所在地：上海闸北

浏览次数：1516 次

立即询价在线咨询

腾讯QQ
MSN

产品简介

大注射能力 – 用四个200 ml注射器可以达到800 ml。 超高注射压力 – 可以提供超过400 lbs的输送推力。 ± 0.5% 的稳定精度 ± 0.1% 的可重复性精度 可编程操作 – 具有通过键盘进行编程的先进特性 经久耐用 - 结实的结构可保证终生工作稳定 只能使用Harvard的不锈钢注射器

产品详细信息

Harvard Apparatus的注射泵以其品种多、精度高和出色的可靠性而享誉世界由于Harvard注射泵的型号及附件众多，不能一一罗列。若要进一步了解相关产品信息，请与上海达域仪器有限公司联系。

High Capacity

This NEW PHD 22/2000 Hpsi Syringe Pump providesthehighest capacity output of all of Harvard Apparatus’microprocessorsyringe pumps. This pump can hold up to foursyringes from 20 to 200ml. By combining the output from four 200ml syringes, this pump isable to infuse up to 800 ml of fluidwithout refilling.

Ultra High Pressure

This NEW PHD 22/2000 Hpsi Syringe Pump over400pounds of force against the syringe plungers, higher than anyotherpump we manufacture. For applications with viscous fluidsorrequiring high pressure, this is the pump to handlethejob.

Versatility

This Programmable PHD 22/2000 Hpsi syringepumpprovides advanced capabilities directly from the keypad.Noexternal computer is required. The pump can store up tofourprograms of 10 sequences each. Programs are stored innon-volatilememory. No other pump can provide this level of controlandflexibility with the accuracy of the PHD 22/2000 syringepumpseries. Like all of Harvard Apparatus’ other pumps, this newhighcapacity pump is easy to use.

Built-to-Last

This pump uses high quality, industrialgradecomponents that will deliver years ofsmoothoperation.

To Accommodate AlmostEveryWorkbench

This pump is provided with a standard 5 footcablethat connects the control box to the pumping mechanism box.Ifadditional distance is required between the controller and pump,a30 foot remote extension cable is offered asanaccessory.

Stainless Steel Syringes

Only Harvard Apparatus’ stainless steelsyringescan be used with this pump. They can withstand highpressureapplications and provide years of service, seepageA70.

技术参数
类型	微处理器驱动型注射泵
稳定精度	± 0.5%
复现精度	± 0.1%
注射器(小/大)	可以使用20到200ml的不锈钢注射器
流速：
*小	1.5 μl/hr
*大	112 ml/min
非易失性存储器	存储所有设置
RS – 232	RJ11-4插头
TTL	9- 针D -Sub. 插头
平均直线推力	433lbs
驱动电机	1.8˚ 步进电机，变速比1:10
电机驱动控制	从1/2到1/32微步步进可以进行微处理器控制
导向螺杆每转一圈电机前机步数	从8000到128000
步速：
*小	27.3秒/步
*大	416.7微秒/步
推进器移动速度：
*小	0.09μm/ min
*大	71.210mm / min
功率	65W,0.5A保险丝
电压范围	95到130V交流,60Hz,220到260V交流,50Hz, 可选
电缆长度	约152 cm(60in)
尺寸, 高x 宽x 长
控制盒	9.5x27.9 x 22.9 cm (3.75 x 11 x 9 in)
注射器托架	22.9x43.2 x 30.5 cm (9 x 17 x 12 in)