雷击耦合/去耦网络 SGN-5010A SGN-5010B SGN-20
产品简介
雷击耦合/去耦网络---针对综合波在电源线上做抗扰度试验的特点和要求而设计的配套设备。SGN-5010A/SGN-5010B是单相网络,SGN-20是三相网络。这三个网络都可以用来与SG-5006组合。网络的性能符合IEC61000-4-5和GB/T17626.5标准的要求
产品详细信息
雷击耦合/去耦网络
耦合方式:电容耦合 | Coupling method: capacitor coupling |
耦合电容:9μF(共模试验) 18μF(差模试验) | Coupling capacitor: 9μF(common mode test) 18μF(normal mode test) |
去耦电感:1.5mH | Decoupling inductor: 1.5mH |
主要技术参数 Specifications
项 目 Item | SGN-5010A | SGN-5010B | SGN-20 |
耦合的浪涌波形 Surge waveform coupled | 综合波(1.2/50μs电压波,8/20μs电流波) Combination waveform(1.2/50μs voltage waveform, 8/20μs current waveform) | ||
*大输入浪涌电压 Max. input voltage waveform | 6.6kV | ||
*大输入浪涌电流 Max. input current waveform | 3.3kA | ||
耦合方式选择 Coupling mode choice | 手动操作 Manual operation | ||
被试设备容量 Power capacity of EUT | 单相,3线,220V,10A Single phase, 3 wire, 220V, 10A | 单相,3线,220V,20A Single phase, 3 wire, 220V, 20A | 三相,5线,380V,20A Three phase, 5 wire, 380V, 20A |
未加浪涌线上的残余电压 The residual surge voltage on unsurged line | 试品不接时,残余电压不超过所施*大试验电压的15% Not exceed 15% of the max. applicable test voltage when EUT is disconnected | ||
电源线入口接的残余电压 The residual surge voltage on the power supply input of the decoupling network | 试品不接时,残余电压不超过所施*大试验电压的15%或电源线峰值电压两倍 Not exceed 15% of the max. applicable test voltage when EUT is disconnected or twice for peak &#118alue of the power line voltage whichever is higher | ||
工作电源 Power in | AC 220V 50/60Hz | ||
环境温度 Operating temp. | 15℃-35℃ | ||
重量 Weight | 25kg | 35kg | |
外形尺寸 Dimensions (D×W×H)mm | 460*520*240 | 460*520*310 |