泄漏电流测试仪 simpson228
产品简介
泄漏电流测试仪:国内220V交流电的电器之泄漏电流是0.75MA,在家用电器中,泄漏电流是指运行的电气部分与绝缘之后的金属间的**电流。 simpson228 AC/DC泄漏电流测试仪主要测试AC/DC泄漏电流,设计符合*新的UL、IEC和ANSI规格。 simpson228查出当前AC和DC漏出并且模仿人的反应在三个不同水平 -- 反应,放弃,以及灼伤危险。
产品详细信息
泄漏电流测试仪:国内220V交流电的电器之泄漏电流是0.75MA,在家用电器中,泄漏电流是指运行的
电气部分与绝缘之后的金属间的**电流。测试方法:家用电器在工作电压下工作时,将电器外壳与大
地绝缘,若将外壳与电器电极用一根导线连接,导线中会有电流流过,这个电流便是泄漏电流。泄漏电
流的存在表明了电器绝缘作用的有限性。因此,泄漏电流的大小是衡量电器绝缘程度好坏的指标之一,
也是家用电器**的重要指标交流豪安表的一端接在电源上,去掉接地线后,把交流豪安表的另一端接
在金属间上即可。
simpson228 AC/DC泄漏电流表主要测试AC/DC泄漏电流,设计符合*新的UL、IEC60990和
ANSI标准。 simpson228查出当前AC和DC漏出并且模仿人的反应在三个不同水平 -- 反应,放弃,
以及灼伤危险。
每个Simpson228具有弹簧夹、指南和电池以及测试笔。
· 查出危险AC & DC 泄漏电流在电子或电子设备导电性表面
· 设计遇见新的IEC、ANSI和UL指南
· 反应,放弃和无重负的**危险网络测量
· 电池操作为*大轻便
Opecifications
GENERAL
|
Reaction ResponseNetwork |
Let-Go ResponseNetwork |
UnweightedBurnHazard Response Network |
|
Equivalent network component values: |
Complies with values specified in IEC 990 (excluding fuse) |
|||
Equivalent measuring instrument load: |
1 MΩ- 10pF |
1 MΩ- 62 pF |
1 MΩ- 1 pF |
|
Ranges: |
0.3, 1, 3, 10 M.I.U. |
0.3, 1, 3, 10 M.I.U. |
0-100 mA RMS |
|
Current accuracy: |
±2% F.S. @ 60 Hz |
|||
Meter measurement method: |
True RMS |
|||
Meter frequency response: |
(Relative to ANSI C101-1992&nbs******bsp;UL-1459 2nd edition) |
|||
DC to 1 Hz |
Pointer shall track within 5% of peak |
|||
2Hz to 19Hz (Accuracy not supported) |
|
|||
20 Hz to 200 KHz |
±2% F.S. |
±2.5% of F.S. |
±2% F.S. |
|
200 KHz to 1 MHz |
±2% F.S. |
±2.5% F.S. |
±5% F.S. |
|
Output sensitivity: |
Full scale meter indication equals 1V RMS (Measured with a 1 MΩ- 12 pF load) |
|||
Output accuracy: |
±2% of reading @ 60 Hz |
|||
Output frequency response: |
(Relative to ANSI C101-1992&nbs******bsp;UL-1459 2nd edition) |
|||
DC to 50Hz |
±2% of reading |
|||
50 Hz to 100 KHz |
±2.5% of reading |
±2% /-3% of reading |
±2% of reading |
|
100 kHz to 1 MHz |
±5% of reading |
|||
Voltmeter range: |
0-300 V (AC&nbs******bsp;DC) |
|||
Voltmeter accuracy: DC to 1 Hz |
Pointer shall track within 5% of peak |
|||
2Hz to 19Hz (Accuracy not supported) |
|
|||
20 Hz to 1KHz |
±3% F.S. @ 60 Hz (Add ±1% for every additional 100Hz) |
|||
Voltmeter frequency response: |
DC to 1 KHz |
|||
Power requirements: |
Power requirements: (2) 9V (NEDA 1604A) batteries |
|||
Physical: |
7" x 5.25" x 3.125", 2-1/2 lbs (1.4kg), ABS plastic,fusedinput |
|||
Environmental: |
27°C ±2° C, 70% non condensing relative humidity. Outside thisrangederate by 10% per °C |
|||
Maximum operating range: |
0° to 40° C |