科尔摩根伺服器伺服驱动器维修F14,F01,F08,F15故障修复

  上海双零自动化设备有限公司专业维修科尔摩根、丹纳赫、力士乐、SEW、西门子、AB、安川、三菱、CT等国内外各种品牌伺服器，伺服放大器，伺服驱动器，伺服电机。
   科尔摩根伺服驱动器S600系列伺服驱动器专为全球化应用而设计，它充分利用了数字伺服技术的优势；其令人信服地证明了其高度的硬/软件灵活性、简易的运行、较大的功能范围－甚至适用于标准装置。配合我们的AKM、CDDR、DDR和DDL系列无刷式伺服电机，S600系列伺服驱动器一定可以为您严格的单轴和多轴应用提供可靠的解决方案。

    双零自动化设备有限公司专业维修科尔摩根伺服驱动器，常见故障有F14,F01,F08,F15,F02,F03,F04,F05,F06,F07,F08,F09,F10,F11,F12,F13,F14,F15,F16,F17等。公司长期备货，维修速度快
   S600科尔摩根伺服驱动器故障信息：

   F01* Heat sink temperature
Heat sink temperature too high
limit is set by manufacturer to 80°
   F02* Overvoltage
Overvoltage in DC bus link
limit depends on the electrical supply voltage
   F03* Following error Message from the position controller
   F04 Feedback Cable break, short-circuit, short to ground
   F05* Undervoltage
Undervoltage in DC bus link
limit is set by manufacturer to 100V
   F06 Motor temperature
Motor temperature too high or temp. sensor defect
limit is set by manufacturer to 145°C
  F07 Internal voltage supply Internal amplifier supply voltages are out of tolerance
  F08* Overspeed Motor runs away, speed is too high
  F09 EEPROM Checksum error
  F10 Flash-EPROM Checksum error
  F11 Brake (motor) Cable break, short-circuit, short to ground
  F12 Motor phase Motor phase missing (cable break or similar)
  F13* Internal temperature Internal temperature too high
  F14 Output stage Fault in the power output stage
  F15 I2t max. I2t maximum value exceeded
  F16* Supply BTB/RTO 2 or 3 phases missing in the mains supply feed
  F17 A/D converter
Error in the analog-digital conversion, normally caused by
extreme electromagnetic interferences.
  F18 Brake Brake circuit faulty or incorrect setting
  F19* Supply phase
A phase is missing in the mains supply power feed
(can be switched off for 2-phase operation)
  F20 Slot fault Slot error (hardware fault on expansion card)
  F21 Handling error Software error on the expansion card
  F22 Earth short circuit For 40/70 amps type only
  F23 CAN-bus off Severe CAN bus communication error
  F24 Warning Warning is displayed as fault
  F25 Commutation error Commutation error
  F26 Limit switch
Homing error (machine has driven onto hardware limit
switch)
  F27 AS
Operational error with -AS- , input for AS-Enable and EN-
ABLE have been set at the same time
  F28 External Trajectory
External position profile generator created a step, that ex-
ceeded the maximum value
  F29 Slot Fault depends on expansion card, see online help
  F30 Emergency timeout Timeout emergency stop
  F31 Macro Macro program error
  F32 System Error system software not responding correctly

S600科尔摩根伺服驱动器型号：

SERVOSTAR 601 DE-89700 -
SERVOSTAR 603 DE-89701 S60300-NA
SERVOSTAR 606 DE-89702 S60600-NA
SERVOSTAR 610 DE-89703 S61000-NA
SERVOSTAR 610-30 DE-102192 S610-3000-NA
SERVOSTAR 614 DE-90846 S61400-NA
SERVOSTAR 620 DE-89704 S62000-NA
SERVOSTAR 601-AS DE-90350 -
SERVOSTAR 603-AS DE-90351 S60301-NA
SERVOSTAR 606-AS DE-90352 S60601-NA
SERVOSTAR 610-AS DE-90353 S61001-NA
SERVOSTAR 610-30-AS DE-102897 S610-3001-NA
SERVOSTAR 614-AS DE-91448 S61401-NA
SERVOSTAR 620-AS DE-90354