SK-2.5-13S管式定碳炉 SK-2.5-13S

点击查看大图

产品价格： < 面议

产品型号：SK-2.5-13S

品牌：其它品牌

公司名称：武汉格莱莫检测设备有限公司

所在地：湖北武汉

浏览次数：438 次

立即询价在线咨询

腾讯QQ
MSN

产品简介

SK-2.5-13S管式定碳炉系周期作业式、供实验室、工矿企业、科研单位、院校作元素分析测定和一般小型钢件淬火、退火、回火等热处理时加热用，高温炉还可作金属、陶瓷的烧结、溶解、分析等高温加热用。控温仪表分为：指针式 A：数显式 AS：智能式 ASP：智能多段

产品详细信息

研发、生产、销售厂家：武汉格莱莫检测设备有限公司
电话：
传真： QQ:34580830
http://www.glmgs.com
http://www.dianzitianping.cn

一、产品简介
One, product introduction
SK-2.5-13S管式定碳炉系周期作业式、供实验室、工矿企业、科研单位、院校作元素分析测定和一般小型钢件淬火、退火、回火等热处理时加热用，高温炉还可作金属、陶瓷的烧结、溶解、分析等高温加热用。控温仪表分为：指针式 A：数显式 AS：智能式 ASP：智能多段
SK-2.5-13S tubular carbon furnace is a batch type, for laboratory, industrial and mining enterprises, scientific research units, colleges and universities for element analysis and determination and general small steel parts quenching, annealing, tempering heat treatment heating, high temperature furnace can also be made of metal, ceramic sintering, dissolution, high temperature heating analysis. Temperature control instrument is divided into: pointer type A: AS: ASP digital display intelligent type: intelligent multi segment
二、技术指标
Two, technical indicators
★额定温度 (℃):1300
Of ( c ): 1300 of the rated temperature
★工作电压(V):220
Of working voltage ( V ): 220
★额定功率(KW):2.5
Of rated power ( KW ): 2.5
★空载升温时(Min):≤40
The no-load temperature of ( Min ): 40
★炉膛尺寸(mm)(L×W×H):φ22-2×600
The size of ( mm ) ( L * W * H ): 22-2 diameter x 600
★外形尺寸 (mm) (L×W×H):600×280×400
Of dimensions ( mm ) ( L * W * H ): 600 x 280 x 400
★配套控制器型号:KSY-6D-16
Of matching controller type: KSY-6D-16
★重量(KG):32
Of weight ( KG ): 32
三、产品特点
Three, product characteristics
★外壳采用**冷轧钢板制成，表面喷塑工艺处理，炉门采用侧开式结构，启闭灵活。
Made of high quality cold-rolled steel plate made of shell, surface spray processing, door adopts a side open type structure, flexible opening and closing.
★中温箱式炉采用封闭型炉膛，以电热合金丝为加热元件制成螺旋形后，盘绕于炉膛四壁之中，散热时炉温均匀延长了使用寿命。
Of moderate box-type furnace adopts a closed type furnace, with the electrothermal alloy wire as the heating component into a spiral, coiled on the furnace walls, heat dissipation to extend the service life of the furnace temperature uniformity.
★高温管式电阻炉采用高温燃烧管，以硅碳棒作为加热元件在炉膛外套内安装。
Of high temperature tubular resistance furnace adopts the high temperature combustion, takes silicon carbide rod as heating elements in the outer sleeve installation.
★高温箱式电阻炉以硅碳棒为加热元件，直接在炉膛内安装，热利用率高。
In the high temperature box type resistance furnace with silicon carbide as a heating element, directly in the furnace installation, high heat utilization rate.
★本系列电阻炉保温材料选用轻质泡沫保温砖以及硅酸铝纤维棉，使其蓄热量和导热系数减少致使炉膛蓄热量大升温时间缩短，表面温升低，空炉损耗率小，耗电量也大大降低。
In this series of resistance furnace insulation material made of light foam insulating brick and aluminum silicate fiber cotton, make the accumulation of heat and heat conductivity coefficient reduced resulting in furnace heat heating time is shortened, surface temperature low, furnace air loss rate is small, the power consumption is greatly reduced.