HCC-25电涡流式测厚仪 HCC-25
产品简介
HCC-25电涡流式测厚仪是以电涡流方法工作的涂层厚度测量仪,仪器的设计符合以下标准:ISO2360和GB4957。同本公司另一产品HCC-24涂层测厚仪不同的是本产品适用于非导磁金属基体上非导电覆盖层厚度的测量,例如:测量铝的阳极氧化层以及铝、铜、锌等材料表面上油漆、喷塑和橡胶覆盖层的厚度,在航空、建材、轻工、机械、仪表、化工等行业已得到广泛的应用。
产品详细信息
研发、生产、销售厂家:武汉格莱莫检测设备有限公司
电话:
传真: QQ:34580830
http://www.glmgs.com
http://www.dianzitianping.cn
一、产品简介
One, product introduction
HCC-25电涡流式测厚仪是以电涡流方法工作的涂层厚度测量仪,仪器的设计符合以下标准:ISO2360和GB4957。同本公司另一产品HCC-24涂层测厚仪不同的是本产品适用于非导磁金属基体上非导电覆盖层厚度的测量,例如:测量铝的阳极氧化层以及铝、铜、锌等材料表面上油漆、喷塑和橡胶覆盖层的厚度,在航空、建材、轻工、机械、仪表、化工等行业已得到广泛的应用。本仪器是一种智能化仪器。由于先进的耐磨导套式测量探头和单片微机的应用,使它具有更多显著的特点,如测量误差小、可靠性高、稳定性好、操作简便、体积小巧、数据处理功能强等,是控制和保证产品质量必不可少的检测仪器。
HCC-25 eddy current thickness gauge is based on eddy current method of coating thickness measuring instrument, apparatus is designed to meet the following criteria: ISO2360 and GB4957. With the company's other products HCC-24 coating thickness is different the product is suitable for the non magnetic metal non-conductive cover layer thickness measurement, for example: measurement of aluminum anodic oxide layer and aluminum, copper, zinc and other materials on the surface of the paint, plastic and rubber cover layer thickness, in aviation, building materials, light industry, machinery, instruments, chemical and other industries has been widely applied. The apparatus is a kind of intelligent instrument. Due to the advanced wear guide sleeve type measuring probe and a single chip microcomputer application, make it has more remarkable characteristics, such as small measuring error, high reliability, good stability, simple operation, small volume, strong function, data processing, control and ensure product quality essential testing instrument.
二、技术指标
Two, technical indicators
★测量范围:0~1200μm。
Of measuring range: 0 ~ 1200 ~ M.
★测量精度:±(1~3%H+1μm)。
Of measurement accuracy: + ( 1 ~ 3%H+1 ~ m ).
★分辨 率:1μm。
The rate of resolution: 1 m.
★*小测量面直径:φ10 mm。
Measurement of minimum diameter: 10 mm diameter.
★显示:4位LCD显示测量的平均值、*大值、*小值、标准偏差和测量次数,同时指示仪器的工作状态及电池使用情况。
On display: 4 LCD display the measured average value, maximum value, minimum value, standard deviation and the number of measurements, and indicate the operating state of the instrument and battery usage.
★电源:6F22型9V电池一节。
Of power: 6F22 9V cell section.
★外形尺寸: 160mm×80mm×30mm。
Of size: 160mm * 80mm * 30mm.
★质量:约250g。
Of quality: about 250g.
★使用环境:温度0℃~40℃;相对湿度不大于90%。
Of use environment: temperature 0 to 40 DEG C; relative humidity of not more than 90%.
三、基本配置
Three, the basic configuration
★HCC-25电涡流式测厚仪 1台
HCC-25 eddy current thickness measuring instrument 1
★6 F22型9V电池 1节
In 6 F22 type 9V battery 1
★标准箔片 3片
The standard 3 piece of foil
★基板 1块
1 pieces of substrate
★产品合格证 1份
1 copies of certificate of product
★产品保修卡 1份
Of product warranty card 1
★产品使用说明书 1份
Instructions for use of products 1
★仪器箱 1只
Instrument box 1.
★试片盒 1只
In the 1 test box
电话:
传真: QQ:34580830
http://www.glmgs.com
http://www.dianzitianping.cn
一、产品简介
One, product introduction
HCC-25电涡流式测厚仪是以电涡流方法工作的涂层厚度测量仪,仪器的设计符合以下标准:ISO2360和GB4957。同本公司另一产品HCC-24涂层测厚仪不同的是本产品适用于非导磁金属基体上非导电覆盖层厚度的测量,例如:测量铝的阳极氧化层以及铝、铜、锌等材料表面上油漆、喷塑和橡胶覆盖层的厚度,在航空、建材、轻工、机械、仪表、化工等行业已得到广泛的应用。本仪器是一种智能化仪器。由于先进的耐磨导套式测量探头和单片微机的应用,使它具有更多显著的特点,如测量误差小、可靠性高、稳定性好、操作简便、体积小巧、数据处理功能强等,是控制和保证产品质量必不可少的检测仪器。
HCC-25 eddy current thickness gauge is based on eddy current method of coating thickness measuring instrument, apparatus is designed to meet the following criteria: ISO2360 and GB4957. With the company's other products HCC-24 coating thickness is different the product is suitable for the non magnetic metal non-conductive cover layer thickness measurement, for example: measurement of aluminum anodic oxide layer and aluminum, copper, zinc and other materials on the surface of the paint, plastic and rubber cover layer thickness, in aviation, building materials, light industry, machinery, instruments, chemical and other industries has been widely applied. The apparatus is a kind of intelligent instrument. Due to the advanced wear guide sleeve type measuring probe and a single chip microcomputer application, make it has more remarkable characteristics, such as small measuring error, high reliability, good stability, simple operation, small volume, strong function, data processing, control and ensure product quality essential testing instrument.
二、技术指标
Two, technical indicators
★测量范围:0~1200μm。
Of measuring range: 0 ~ 1200 ~ M.
★测量精度:±(1~3%H+1μm)。
Of measurement accuracy: + ( 1 ~ 3%H+1 ~ m ).
★分辨 率:1μm。
The rate of resolution: 1 m.
★*小测量面直径:φ10 mm。
Measurement of minimum diameter: 10 mm diameter.
★显示:4位LCD显示测量的平均值、*大值、*小值、标准偏差和测量次数,同时指示仪器的工作状态及电池使用情况。
On display: 4 LCD display the measured average value, maximum value, minimum value, standard deviation and the number of measurements, and indicate the operating state of the instrument and battery usage.
★电源:6F22型9V电池一节。
Of power: 6F22 9V cell section.
★外形尺寸: 160mm×80mm×30mm。
Of size: 160mm * 80mm * 30mm.
★质量:约250g。
Of quality: about 250g.
★使用环境:温度0℃~40℃;相对湿度不大于90%。
Of use environment: temperature 0 to 40 DEG C; relative humidity of not more than 90%.
三、基本配置
Three, the basic configuration
★HCC-25电涡流式测厚仪 1台
HCC-25 eddy current thickness measuring instrument 1
★6 F22型9V电池 1节
In 6 F22 type 9V battery 1
★标准箔片 3片
The standard 3 piece of foil
★基板 1块
1 pieces of substrate
★产品合格证 1份
1 copies of certificate of product
★产品保修卡 1份
Of product warranty card 1
★产品使用说明书 1份
Instructions for use of products 1
★仪器箱 1只
Instrument box 1.
★试片盒 1只
In the 1 test box