PMS系列粉尘浓度传感器 PMS

点击查看大图

产品价格： < 面议

产品型号： PMS

品牌：美国DWYER

公司名称：陕西正捷工程科技有限责任公司

所在地：陕西西安

浏览次数：572 次

立即询价在线咨询

腾讯QQ
MSN

产品简介

PMS系列粉尘浓度传感器
和DPM监控仪表配套使用

和DPM监控仪表配套使用

和DPM监控仪表配套使用

和DPM监控仪表配套使用

产品详细信息

产品名称: PMS系列粉尘浓度传感器
产品型号: PMS

和DPM监控仪表配套使用

Service: Air and compatible gases, any type particulate.
Wetted Materials: 304SS and PTFE.
Minimum Detection: 5.0 pA.
Temperature Limits: Ambient: Maximum -40 to 392°F (-40 to 200°C) (Maximum must be calculated for each application).
Process: See Model Chart on Ordering Page.
Pressure Limits: Standard: Full vacuum to 10 psi (0.69 bar); Optional: 100 psi (6.89 bar).
Output Signal: pA.
Electrical Connection: Low noise coaxial.
Process Connection: See Model Chart on Ordering Page.
Enclosure: Standard: Painted cast aluminum, Weatherproof, NEMA 4X; Optional: Intrinsically Safe, CSA.
Weight: Varies depending on length of probe and type of mount.
Agency Approvals: CE, CSA.

选型表

Example	PMS	A1	1	T1	P1	L1.5	PMS-A1P1T1P1-L1.5 Particulate Sensor, weatherproof, NEMA 4X, 1/2" NPT connection, 250°F max. temp., 10 psi max. pressure, 1.5" probe.
Series Designator	PMS						PMS Particulate Sensor
Enclosure Rating		A1 AHZ1					Weatherproof, NEMA 4X Intrinsically Safe, CSA & CE Approvals, Class I, II and III, Divisions I & II, All Groups, NEMA 4X (requires sanitary connection or flange mount).
Process Connection			1 2 3 4				1/2" NPT 1.5" Sanitary Connection 2" 150# ANSI Flange 2" 150# ANSI Flange with Process Mating Flange and Installation Kit.
Maximum Process Temperature				T1 T2 T3 T4			250°F (121°C) 450°F (232°C) 800°F (426°C) -requires flange mount 1200°F (649°C) - requires flange mount
Maximum Process Pressure					P1 P2		10 psi 100 psi - requires flange mount
Insertion Length (recommended at least 1/2 duct diameter)						L1.5 L03 L05 L10 L15 L20 L30 L36 L48 L60 L72	1.5" Probe 3" Probe 5" Probe 10" Probe 15" Probe 20" Probe 30" Probe 36" Probe 48" Probe 60" Probe 72" Probe