Part Number: 24-392-026
|
Description: WorkFit-A with Suspended Keyboard, Sit-Stand Workstation, Dual monitors (polished aluminum, black)
|
Includes arm, desk clamp, grommet mount, monitor riser, crossbar bow, monitor pivots (2), keyboard tray support bracket, worksurface, keyboard tray, assembly fasteners, Velco, cable wrap, adjustment tools
|
NOTE: Extra-long cables may be required to span between standing and sitting heights
|
* Weight Capacity: Maximum total load on height-adjustment assembly ≤ 25 lbs (11.3 kg). LCD weight = 4.5–10 lbs (2.0–4.5 kg) each, worksurface ≤ 5 lbs (2.3 kg), keyboard tray ≤ 2 lbs (.9 kg). For proper operation the total maximum weight when added together should not exceed 25 lbs (11.3 kg)
|
† Lift Range: LCD and keyboard adjust 20" (51 cm) in tandem; LCD adjusts 5" (13 cm) independently; maximum LCD height adjustment = 25" (63.5 cm)
|
When in seated position, keyboard tray can drop down ≤ 4" (10 cm) below level of desktop surface, placing the keyboard at the optimum ergonomic height
|
Mounting Surface Requirements: When installed using Desk Clamp option, can be configured to work with desk surfaces up to 31.5" (80 cm) deep. When installed usingGrommet Mount option, center of through-hole should be no more than 29.5" (75 cm) from front edge of desk surface. These requirements ensure that the suspended keyboard tray can extend past the desktop’s front edge
|
Keyboard tray can be installed in 3 different positions: centered, offset right or offset left
|
Keyboard tray designed with slight tilt to ensure wrists remain in a neutral position during data entry and help prevent repetitive stress-injuries; tray can be flipped up 90º when not in use
|
Integrated cable management hides wires
|
Worksurface Dimensions: Approximately 0.25" H x 22" W x 10"D (6.4 x 560 x 255 mm)
|
Desk clamp attaches to edge up to 2.5" (65 mm) thick; grommet mount attaches through hole 0.5" to 2.5" (7–65 mm) wide and up to 2.5" (65 mm) thick
|
Mounting Standards: VESA FDMI, MIS-D, 75/100, C (hole patterns = 100 x 100 mm and 75 x 75 mm)
|
Can be configured to hold a laptop alongside a monitor: order Conversion Kit (97-617)
|
** A Washington State analysis of case studies related to office ergonomics showed a median productivity increase of 12% following an ergonomic intervention. New studies from the Office Ergonomics Research Committee (OERC) suggest that employees who are provided with well-designed ergonomic furniture and are trained to use it see an average productivity increase of 18%
|
This product is certified in compliance with indoor air quality standards defined by ANSI/BIFMA pertaining to emissions of VOC (volatile organic compounds)
|
Shipping Dimensions: 36" x 21.25" x 10.75" (941 x 540 x 273 mm)
|
Shipping Weight: 48.5 lbs (22 kg)
|
Warranty: Five (5) years
|