日本SENTEC高精度位移传感器LS-115系列已停产

我公司代理日本胜铁克(SENTEC)之产品高精度位移传感器LS-115系列已经停产，替代产品型号为LS-117系列，另外组合使用的探头型号也已变更，特此通知，给您带来工

作上的不便敬请谅解！详细停产型号对应替代品的型号和参数请参考如下：

已停产产品型号及参数：

Specification of LS-115 series

Controller/Head
LS-115-1/HA-30S
Measuring Range*1:0~0.8mm
Linearity Range*2:0~0.4mm
Output Voltage:0~0.8V
Linearity:±2% F.S.
Resolution:0.1% F.S.(Min.Resolution 1um)
Response:DC~5KHZ
Output Impedance:52Ω
Temperature Drift:Controller:0.02% F.S./℃，Head:0.03% F.S./℃
Operating Temperature:Controller:0~60℃,Head:-10~70℃
Supply Power:12~30V DC 50mAMax.(Ripple rate 20% Max.)
LS-115-2/HA-50S
Measuring Range*1:0~1mm
Linearity Range*2:0~0.6mm
Output Voltage:0~1V
LS-115-3A/HA-80S
Measuring Range*1:0~2mm
Linearity Range*2:0~1.4mm
Output Voltage:0~2V
LS-115-3B/HA-101S
Measuring Range*1:0~2mm
Linearity Range*2:0~1.4mm
Output Voltage:0~2V
LS-115-4A/HA-141S
Measuring Range*1:0~4mm
Linearity Range*2:0.5~2.0mm
Output Voltage:0~4V
LS-115-4B/HA-225S
Measuring Range*1:0~4mm
Linearity Range*2:0.5~2.0mm
Output Voltage:0~4V

*1:Linearity shows a slight decrease, but measuring range of accuracy is repeatedly insured.
*2:Measuring range of 2% linearity accuracy is insured.



替代产品型号及参数：

Specification of LS-117 series

Controller/Head
LS-117-1/HA-30R
Measuring Range*1:0~0.8mm
Linearity Range*2:0~0.3mm
Output Voltage:0~0.8V
Linearity:±2% F.S.
Resolution:0.1% F.S.(Min.Resolution 1um)
Response:DC~10KHZ(-3dB)
Output Impedance*3:52Ω
Temperature Drift:Controller:0.02% F.S./℃，Head:0.03% F.S./℃
Operating Temperature:Controller:0~60℃,Head:-10~70℃
Supply Power:24V DC ±10%(Ripple rate 10% Max.)
Function*4:Detection of broken wire mulfunction
LS-117-2/HA-50R
Measuring Range*1:0~1mm
Linearity Range*2:0~0.5mm
Output Voltage:0~1V
LS-117-3A/HA-80R
Measuring Range*1:0~2mm
Linearity Range*2:0~1.3mm
Output Voltage:0~2V
LS-117-3B/HA-101R
Measuring Range*1:0~2mm
Linearity Range*2:0~1.3mm
Output Voltage:0~2V
LS-117-4A/HA-141R
Measuring Range*1:0~4mm
Linearity Range*2:0.5~2.0mm
Output Voltage:0~4V
LS-117-4B/HA-225R
Measuring Range*1:0~4mm
Linearity Range*2:0.5~2.0mm
Output Voltage:0~4V

*1:Linearity shows aslight decrease,but measuring range of accuracy is repeatedly insured.
*2：Measuring range of 2% linearity accuracy is insured.
*3:Setting distance of 1/2 F.S.,10℃ interval/hr,target of SS400,cable length 3m
*4:If the sensor cable is broken,Red LED(ALARM) onthe front panel is ligted,and output the non-contact signal