Microwave level sensor（NOHKEN）

MODEL MWS MICROWAVE LEVEL SENSOR

Features
●Non-contact sensing
●Strong penetration of nonmetallic walls
●No angle adjustment required
●Spinning wave transmission

Conformity
Japan Telecommunication rules Part38-2-4.

General Description
The MWS series microwave level sensor is designed for non-contact level sensor.The MWS is ideal for single point level detection. It is an ON/OFF switch for object position and plugged chute detection.
The MWS consists of microwave transmitter and receiver.When an object interrupts the path of the microwaves,the transmissions of the microwaves decreases.This damping is detected and converted into a relay output.

Technical Advantages
●Strong Penetration
24 GHZ high frequency is not attenuated by dust,moisture,or vapor.This frequency is also safe for humans.
●Spinning Wave Transmission
To eliminate faulty signals by unwanted reflected waves,this optional model MWS transmits the spinning wave.The normal direction of spin from Transmitter is clockwise.If there is an obstruction such as angle or beam,the direction of spin will be counter-clockwise by reflecting from it.The receiver,however,will not receive this reflected signal as that from an undesired obstruction.
●No Angle Adjustment Required
Approx.30 degrees beam spread prevents misalignment.
●Conformity with Japan Telecommunication Rules
The MWS is in conformity with Japan's
Telecommunication rules Part 38-2-4.

Model:MWS-CT-1,MWS-CR-1,MWS-ST-11,MWS-SR-11,MWS-CT/CR-1,MWS-ST/SR-11

Mounting:G1"
Supply Power:100/200V AC ±10%，50/60HZ
Power Consumption:Approx.2VA Max.
Operating Temperature:-10℃ to 55℃
Maximum Pressure:500kPa/5bar
Frequency:Approx.24.2 GHZ
Cable Entry:G3/4
Protection:IP55
NOHKEN