30V-10A-60W Output Module Specification Autoranging Power Supplies PM2811, PM2812 and PM2813 Range Output Voltage: 0 to 30V Output Current: 0 to 10A Output Power: 60W Overvoltage protection: 2 to 32V Accuracy (at calibration temperature) Output Voltage: ± (0.04% of setting + 10 mV) Output Current: ± (0.1% of setting + 50 mA) Over Voltage Protection: ± (0.5 % of setting + 150 mV) Temperature coefficient Output Voltage: (0.016% of setting + 2 mV) /K Output Current: (0.05% of setting + 2 mA) /K Long term drift (in an 8 hour period) Output Voltage: 0.04% of setting + 5 mV Output Current: 0.05% of setting + 10 mA Programming Resolution (12 bit) Output Voltage: 7.5 mV/LSB) Output Current: 2.5 mA/LSB) Over Voltage Protection: 7.5 mV/LSB) Source Effect (for any line voltage change within rating) Voltage: ± (0.01% of setting + 2 mV) Current: ± (0.02% of setting + 2 mA) Load Effect (load change 10% to 90% or 90% to 10% full load) Constant Voltage: ± (0.01% of setting + 5 mV) Constant Current: ± (0.02% of setting + 5 mA) Load cross regulation Negligible for both voltage and current Output Noise (PARD) Constant Voltage pp/rms (40 Hz to 30 MHz): 15 mV/3 mV Constant Current rms: 10 mA Switching Frequency: approx. 20 kHz