产品名称：KANON中村分离式电子扭力扳手

分离式电子扭力扳手 KANON中村分离式电子扭力扳手

品牌:KANON中村

型号:DTC-50EXL

产地:日本

特点:KANON中村分离式电子扭力扳手
     精       度：±1%+1位数字
     显       示：4位数LCD扭力值显示
     测量状态：峰值及峰值保留
     测量方向：自动L / R转变，L / R位置显示
     电       源：镍电池(“AA”1.2V X 2) 电池充电后可连续使用20小时
     自动关闭：3分40秒电源自动关闭
     存贮数值：100个数值
     输       出：打印输出(专用TPK - 3)   模拟输出<<0到1.024(中间点)到2.048v>>   

规格
     DTC-50EXL            
     测量范围：5-50kgf.cm
     *小读数值：0.05kgf.cm

DTC - N50EXL
    测量范围：50 - 500cN.m
    *小读数值：0.5 cN.
 

DTC-50EXL Digital Torque Wrench With Connected Display

Digital Torque Wrench With Connected Display

The display is separate from the wrench. The slender wrench body facilitates measuring lower torques.

FEATURES

• Accuracy:±1% of indicated value +1 increment, over the full range
• Display:Torque reading 4-digit LCD display
• Measurement modes:Peak hold(P.A) ⁄ Peak to peak hold(P.B) ⁄ Run(RUN)
• Direction of measurement:Automatic CW⁄CCW changeover,provided with CW⁄CCW status dispay
• Power supply:Two rechargeable "AA"1.2V batteries and a 100-240V battery charger
• Battery life:Approximately 20 hours with fully charged batteries(continuous operation)
• Power off:Auto power-off, approximately 3 minutes 40 seconds
• Tolerance setting:Automatic judgment capability per the Min⁄Max settings
• Data memory:100 pieces of data
• Output:Printer output(exclusively to a TPK-3), analog output <<0 to="" 1.024(mid="" point)="" 2.048v="">>

SPECIFICATIONS

Model DTC-EXL(kgf·cm)

Model	Range	Increment
DTC-50EXL	5乣50kgf·cm	0.05kgf·cm

Model DTC-N-EXL(N·m)

Model	Range	Increment
DTC-N5EXL	50乣500cN·m	0.5cN·m

Model DTC-EXL(lbf·in)

Model	Range	Increment
DTC-PI40EXL	4乣40lbf·in	0.01lbf·in