KPB-2F13、KPB-2F18、KPB-2F25 两面吸附永磁夹具日本KANETEC 型号:KPB-2F13、KPB-2F18、KPB-2F25 品牌:日本KANETEC强力 名称:两面吸附永磁夹具 [用途] 在电火花、磨削加工中,可夹持工件。在组装作业和轻加工时,可作为夹具使用。 [特点] ●属两面吸附型,对两面可分别进行ON/OFF 切换(2F)。 ●通过磁铁的ON/OFF(2F),以固定在作业台上。 ●可作侧面的吸附(ON/OFF 切换操作面)(2F)。 ●固定在作业台时,使用安装面的螺丝孔。此外,也可通过磁铁吸盘吸附进行固定(1F)。 ●两侧面均持有操作部,因此能轻松地进行切换作业。 ●重量轻,能简单地调节位置。 ●可拆卸操作盘,因此不会妨碍作业。 ●2 台/1 套,已同时进行了精工。 ●属防滴、耐油结构,可在液体中使用。 KPB DOUBLE-FACE HOLDING PERMANENT MAGNETIC BLOCK [Application] These blocks can hold workpieces during electric discharge machining and grinding. They can also be used as holding tools for assembly and light duty machining. [Features] ●The both sides can hold workpieces and can be turned on and off individually. (2F type) ●They are secured to the work table by turning on and off the magnet. (2F type) ●The side faces (ON/OFF switchover face) can also hold workpieces. (2F type) ●They are secured to the work table using tapped holes provided on the mounting face. They can also be secured by having them held by a magnetic chuck. (1F type) ●The operation part is provided on both side faces to facilitate on/off operation. ●Light weight for easy positional adjustment. ●The operating handle is detachable and does not hinder the work. ●One set of two blocks has been machined and finished together. ●They are of drip-proof and oil-resistant construction to allow them to be used in fluid.
KPB-2F13、KPB-2F18、KPB-2F25 两面吸附永磁夹具日本KANETEC 型号:KPB-2F13、KPB-2F18、KPB-2F25 品牌:日本KANETEC强力 名称:两面吸附永磁夹具 [用途] 在电火花、磨削加工中,可夹持工件。在组装作业和轻加工时,可作为夹具使用。 [特点] ●属两面吸附型,对两面可分别进行ON/OFF 切换(2F)。 ●通过磁铁的ON/OFF(2F),以固定在作业台上。 ●可作侧面的吸附(ON/OFF 切换操作面)(2F)。 ●固定在作业台时,使用安装面的螺丝孔。此外,也可通过磁铁吸盘吸附进行固定(1F)。 ●两侧面均持有操作部,因此能轻松地进行切换作业。 ●重量轻,能简单地调节位置。 ●可拆卸操作盘,因此不会妨碍作业。 ●2 台/1 套,已同时进行了精工。 ●属防滴、耐油结构,可在液体中使用。
KPB DOUBLE-FACE HOLDING PERMANENT MAGNETIC BLOCK [Application] These blocks can hold workpieces during electric discharge machining and grinding. They can also be used as holding tools for assembly and light duty machining. [Features] ●The both sides can hold workpieces and can be turned on and off individually. (2F type) ●They are secured to the work table by turning on and off the magnet. (2F type) ●The side faces (ON/OFF switchover face) can also hold workpieces. (2F type) ●They are secured to the work table using tapped holes provided on the mounting face. They can also be secured by having them held by a magnetic chuck. (1F type) ●The operation part is provided on both side faces to facilitate on/off operation. ●Light weight for easy positional adjustment. ●The operating handle is detachable and does not hinder the work. ●One set of two blocks has been machined and finished together. ●They are of drip-proof and oil-resistant construction to allow them to be used in fluid.