TPG-700AKDS锥形规制动夹具/锥形规阶梯式刻度带固定夹具
可以保持锥形规的测量位置。
在难以确认刻度的测量环境下，发挥威力!
用途
用锥形规测量孔径和槽宽时,即使在难以确认测量值的测量环境下也能保持测量值,能简单地进行测量后的数值确认
通过读取锥形规的刻度和锥形规制动夹具的端面位置，防止视差
本体材质
ABS
特长
锥形规的保持力可以通过调整螺丝来变更
使用锥形规和制动夹具 (各2组)、15cm直尺,可简单地进行简单的孔芯间的测量
规格
对应锥形规:测量范围1~15mm、板厚1.0.1.2mm(规格#700款)
对应直尺:长150mm,宽15mm、厚0.5mm(JIS规格金属制直尺150mm)
锥形规的使用可能范围:1~14mm
测量孔中心之间时..适用孔径: 2~14mm
.芯间测量范围:60~140mm
.测量精度:约0.5mm
型号
精度
重量
TGS-15
制动夹具单品
16g
TPG-700AKDS
制动夹具十阶梯刻度锥形规套装
26g
TPG-700AKDS TAPER GAUGE STOPPER/ TAPER GAUGE KAIDAN WITH STOPPER
Capable of retaining the measuring position of Taper gauge. Useful when reading scale in a hard-to-see environment.
USE
When measuring hole diameter or groove width with a taper gauge, the measured value is retained even in a measurement environment where it is difficult to check the measured value
For prevention of parallax by reading scale of taper gauge and end face position of taper gauge stopper
MATERIAL
ABS (body)
FEATURES
Retaining force of the taper gauge can be changed with the adjusting screw.
Simple center-to-center measurement is possible by combination use of taper gauge, stopper (2pcs each) and a 15cm ruler.
SPECIFICATIONS
Applicable taper gauge: Measuring range 1~15mm, Thickness 1.0・1.2mm (Standard #700 type)
Applicable ruler: Length 150mm, Width 15mm, Thickness 0.5mm (JIS straight metal ruler 150mm)
Taper gauge useable range: 1~14mm
When measuring center-to-center ...Applicable hole diameter: $2~14mm
...Center-to-center measuring range: 60~140mm
..Measurement accuracy: Approx.0.5mm
Model no.
Configuration
weight
STOPPER
STOPPER + TAPER GAUGE KAIDAN TPG-700AKD (SET)