Features: 性能特点
l Up to +/- 7000V(DC+Peak AC) Differential
l Bandwidth up to 70MHz
l Safety Certified
l Overrange Indicator
Applications: 应用
l High Voltage Floating Measurement
l Voltage Surge Measurement
l Electronic Ballast Design
l Power Electronics System Design
技术参数
Bandwidth
DC to 70MHz (-3dB)
Attenuation
1:100/1000
Accuracy
+/- 2%
Rise Time
<5ns
Input Impedance
50Mohm//10pF each side to ground
Input Voltage
-Category
CAT I
-DifferentialRange*
+/- 700V(DC+AC Peak) and 500Vrms @ 1/100 +/-7000V(DC+AC Peak) and 5000Vrms@1/1000
-CommonModeRange*
+/-7000V(DC+AC Peak) and 5000Vrms @1/100 & 1/1000
-Absolute Max. Voltage*
Output Voltage
- Swing (into 50kohm load)
+/-7V
-Offset (typical)
<+/-5mV
-Noise (typical)
0.9mVrms
-Source Impedance (typical)
50 ohm (for using 1Mohm input system oscilloscope)
CMRR (typical)
-80dB @50Hz, -60dB @20kHz
Ambient Operating Temperature
-10 to 40 degree centigrade
Ambient Storage Temperature
-30 to 70 degree centingrade
Ambient Operating Humidity
Up to 85% RH
Ambient Storage Humidity
Power Requirements
-Standard
4xAA cells or 6VDC/200mA mains adaptor** or regulated 9VDC/120mA mains adaptor**
-Options
Power leads
Length of BNC Cable
90cm
length of Input Leads
60cm
Weight
500gms
Dimension(LxWxH)
202mm x83mmx38mm
*Voltage limit is the lesser of the DC+AC Peak and RMS values. ** a. The supplied voltage must be less than 12V and greater than 4.4V, otherwise the probe could be damaged or can't be operated properly. b. polarity is "+" inside and "-" outside. For wrong polarity, built-in circuit protects the probe, no danger or damage will occur. c. When the voltage of the cells become too low, the power indicator on the panel will flicker.
主要销售：LCR测试仪,,信号发生器,数字存储示波器,绝缘电阻测试仪扭力扳手扭矩扳手耐压测试仪直流电阻测试仪数字电桥等等测量仪器，测试仪器，工具等。（点击关键词可进入相关产品目录）扭力测试仪瓶盖扭力测试仪数字电桥,扭力扳手
咨询专线:
在订货前*好还是致电我们，以确定货期和数量。
咨询电话：021-530842187 -111
专线： / 包小姐/景小姐
本标题页面：SI-9010A差分探头
沪公网安备 31010102004806号
