LPK2EB-PTC1,LPK2EB-KTC1,LPB2EB-PTC1,LPB2EB-KTC1,LPD3EB-PTC1.LPD3EB-KTC1,LPF4EB-PTC1,LPF4EB-KTC1,LPH4EB-PTC1,LPH4EB-KTC1,
LPD4EB-PTC1,LPD4EB-KTC1,LPG4EB-PTC1,LPG4EB-KTC1,LPK5EB-KTC3,LPK5EB-KTC3,LPH5EB-KTC3,LPH5EB-KTC3,LPA3EB-PTC1,LPA3EB-KTC1,
LPK3EB-KTC1,LPK3EB-KTC1,LPB4EB-PTC1,LPB4EB-KTC1,LPE4EB-KTC3,LPE4EB-KTC3,LPG5EB-KTC3,LPG5EB-KTC3,LPH6EB-KTC3,LPH6EB-KTC3,
LPK7EB-KTC3,LPK7EB-KTC3,LPH7EB-KTC3,LPH7EB-KTC3,LVH7EB-WTSK*,LPJ8EB-PTCB*,LPH8EB-PTCB*
•所有型号标配: 三功能阀,注射阀, 底阀, 进出口软管(标*的型号无三功能阀) •电源:220V*大功率:300W
•配五功能阀需单独订货
•PVC泵头可选,价格与PVDF泵头材质相同.
![](//zt.yzimgs.com/ComFolder/200068581/image/202002/202002031312312871.jpg)
![](//zt.yzimgs.com/ComFolder/200068581/image/202002/202002031312315561.jpg)
美国帕斯菲达pulsafeeder电磁计量泵LPK5EB-PTC3,加药泵流量控制方式:脉冲+液位信号控制,泵头材质:PP
*手动:频率,冲程同时可调 *流量0.5-95升/小时,压力2-21Bar *自动:可选4-20mA脉冲信号,液位信号接收功能 *21种机型
美国帕斯菲达pulsafeeder电磁计量泵LPK5EB-PTC3,加药泵流量控制方式:脉冲+液位信号控制,泵头材质:PP
・ 如果排放管路中的流体压力低于环境压丿J.则在排放管路屮使用抗虹吸阀。如果注入点位于水
泵吸入端,或者靠着“负”压头,如在往下给送到井中时,则会发生虹吸作用。
重要: 注入点必须高于溶液供应罐顶部,以阻止重力送料,除非注入点总是有合适的背压。 安装抗虹吸阀门可以阻止重力送料。
・ 所有高粘度泵(HV系列)要求灌注吸入。
・ 墙式或架式安装请参阅图3。将吸入管连接到化学泵的吸入阀上。吸入阀是较低的阀门。 其管道应足够长,使底阀/过滤器组件悬挂在化学储罐底部上方1-2英寸(2-5 cm)处。 储罐应有盖,防止化学药品污染。
PULSAtron Series E Plus Metering Pump
504 GPD @ 20 PSI, 230 VAC
4-20 mA Input with Dual Manual Control and Stop Function Input
Stroke frequency control via 4-20 mA signal input, manual stroke length control. Stroke frequency is manually adjustable when in local control. Includes stop function input.
General Description
Pulsafeeder PULSAtron Series E Plus chemical metering pumps are positive displacement, diaphragm type pumps. Output volume is adjustable while pumps are in operation from zero to maximum capacity. The PULSAtron Series E Plus contains a highly reliable timing circuit as well as circuit protection against voltage and current upsets. This pump features solenoid protection by thermal overload with auto-reset. The Series E Plus guided check valves, with their state-of-the-art seat and ball designs, provide precise seating, and excellent priming and suction lift characteristics. Our timing circuit is highly reliable and, by design, virtually unaffected by temperature, EMI and other electrical disturbances.
Pump Controls
Adjustment is by means of readily accessible dial knobs, one for changing stroke length and the other for changing stroke frequency. Both knobs are located opposite the liquid handling end. Automatic control via 脉冲 DC and stop function inputs. Auto-Off-Manual switch.
Drive Assembly
The pump drive is totally enclosed with no exposed moving parts. Electronics are housed in chemical resistant enclosure at the rear of the pump for maximum protection against chemical spillage. Average electrical power consumption is 130 Watts.
Materials of Construction
See Specifications tab. Chemical metering pump housing shall be of chemically resistant PBT thermoplastic. All exposed fasteners are stainless steel. Valve seat and seal ring are renewable by replacing the cartridge valve assembly.
Pulsafeeder PULSAtron Series E Plus Chemical Metering Pump - Key Features
-
Manual Control by on-line adjustable stroke rate and stroke length.
-
Highly Reliable timing circuit.
-
Circuit Protection against voltage and current upsets.
-
Panel Mounted Fuse.
-
Solenoid Protection by thermal overload with auto-reset.
-
Water Resistant, for outdoor and indoor applications.
-
Indicator Lights, panel mounted.
-
Guided Ball Check Valve Systems, to reduce back flow and enhance outstanding priming characteristics.
-
Few Moving Parts and Wall Mountable.
-
Safe & Easy Priming with durable leak-free bleed valve assembly (standard).
-
Reliable metering performance.
-
Rated "hot" for continuous duty.
-
Leak-free, sealless, liquid end.
Brand:Pulsafeeder
Product:Pumps
Type:Diaphragm Metering Pump, Solenoid Driven
Product Line:PULSAtron Series E PLUS
Operating Modes:4-20 mA / Off / Manual
Max. Flow (GPH):21.00
Max. Flow (GPD):504
Max. Pressure (PSI):20
Max. Viscosity (cps):1,000
Max. Strokes per Minute:125
Flow Control:4-20 mA Input with Dual Manual Control and Stop Function Input
Turn Down Ratio:100:1
Head / Fittings:GFPVDFL
Valve Balls:Ceramic
Diaphragm:PTFE faced CSPE
Valve / Seat / O-ring:TFE
Connections:Tubing 3/4" O.D.
Power Supply:230 VAC 50/60 Hz, US Plug
Notes:No Bleed Valve with this model.
Includes:
A weighted foot valve/strainer assembly, a 1/2" NPT male injection fitting/back pressure check valve assembly, 4' suction tubing, 8' discharge tubing and Owners Manual
- 温馨提示:为规避购买风险,建议您在购买前务必确认供应商资质与产品质量。
- 免责申明:以上内容为注册会员自行发布,若信息的真实性、合法性存在争议,平台将会监督协助处理,欢迎举报