西南代理美国Mountz蒙士扭矩传感器BLRTSX140z-RA (170261)

美国MOUNTZ蒙士扭矩传感器BLRTSX140z-RA (170261)

• Non-contact signal transfer and maintenance free.
• The brushless rotary torque & angle sensor is a compact design & bi-directional.
• Used in-line with rotating shafts or nutrunners for feed back control. Motor testings, high RPM Tools or rotational measurement applications.
• RA Models:
  - Angle output 2-channel quadrature
  - 360 pulses per rotation
  - Ability to measure the rotation angle of a fastener
  - Joint rate & breakaway torque can be measured too
• Features ARCII technology, an instant auto-recognition system of the BLRTSX connected to the PTT or LTT.
• Accuracy ± .2% of full scale*.

Note: Note: * This is the stand alone accuracy for the torque sensor. When the torque sensor is coupled with a Mountz torque analyzer, there is a system accuracy. Review the system accuracy listed with each torque analyzer (PTT or LTT).

Torque Ranges

R models are Torque only transducers.
RA models are Torque & Angle tranducers.
* With feather keyways (2x180 degree)

Certified: Supplied with NIST-Traceable Certification of Calibration

Dimensions

BLRTSX-R Pin Connection A = Ground (Shunt Calibration) C = Torque Output D = Ground (Torque Output) E = Ground (Supply) F = Supply, 11-26 VDC, 1 W K = Shunt Calibration M = Shield B,G,H,J & L = N/A

BLRTSX-RA Pin Connection A = Ground (Shunt Calibration) B = Angle 1 Speed C = Torque Output D = Ground (Torque Output) E = Ground (Supply) F = Supply, 11-26 VDC, 1 W G = Angle 2 (90 running after Angle 1) H = +5V (Angle Voltage) K = Shunt Calibration M = Shield J & L = N/A

Note! For optimum performance, it is recommended to utilize coupling in order to minimize extraneous load & moments due to misalignment. Contact customer service for information.

美国MOUNTZ蒙士扭矩传感器BLRTSX140z-RA (170261)