16位分辨率
8路差分输入
T/C软件组态,低电压电流输入
隔离电压:3000 Vdc
支持Modbus/RTU控制
支持4~20mA
线路烧坏检测功能
ADAM-4018+是一款16位、8通道的模拟量输入模块,可编程输入通道的输入范围。这些模块在工业测量和监控应用方面是一项经济的解决方案。它能够在模拟量输入通道与模块之间提供3000VDC的光隔绝保护,以避免模块和周边设备被输入线上的高压损坏。
ADAM-4018+-BE
Display LED Indicators Power
Power Supply Power Requirement 10~30 VDC
Analog Input Channels 8 differential
Current Input ±20 mA, 4~20mA
Direct Sensor Input J, K, T, E, R, S, B Thermocouple
Burn-out Detection Yes (All T/C)
Channel Independent Configuration Yes
Sampling Rates 10 samples/second
Resolution 16-bit
Input Impedance Thermocouple: 20 MOhm Current: 120 Ohm
Span Drift ±25 ppm/°C
Zero Drift ±6 µV/°C
General Watchdog Timer System (1.6 second) & Communication
Connector 2 x plug-in terminal block (#14~22 AWG)
Temperature (Operating) -10~70 °C (14~158 °F)
Humidity 5~95 %RH
Temperature (Storage) -25~85 °C (-13~185 °F)
Interface RS-485
Isolation Protection 3000 VDC
Communication Protocol ASCII command & Modbus/RTU
Communication Speed Serial: From 1,200 to 115.2 k
Comm. Distance Serial: 1.2 km
Data Flow Control Yes