用于供水出水，管网水质情况的在线监测。建立出水，管网系统的水质信息数据库，多参数的在线监测，包括：pH、电导率、余氯或二氧化氯、浊度、溶解氧、温度，安装方便，系统仅有一个样品入口、一个废液排口和一根电源连接线。
Used for online monitoring of water supply and water quality. Establish water quality, water quality information database of pipe network system Multi-parameter online monitoring, including: pH, conductivity, residual chlorine or chlorine dioxide, turbidity, dissolved oxygen, temperature Easy to install, the system has only one sample inlet, one waste vent and one power cable.
参数量程（根据不同水质选用不同量程的传感器）：
pH 0.01～14.00pH
电导率 0.01～30000μs/cm
浊 度 0.001～20.00NTU～4000NTU
余氯/二氧化氯 0.001～5.000mg/L
溶解氧 0.01～20.0mg/L
温 度 0.1～100.0℃
系统输出 2路RS485 MODBUS RTU；1路RS232或DTU远传
安装方式 默认立式
过程连接 水样入口 标配G1/2
废液排放口 标配G1/2
重 量 约45KG
尺 寸 1470*500*400mm
水样温度 5～40℃
样品流速 400～600mL/min
防护等级 IP65
供电电源 100～240VAC或其它定制
耗电功率 约3W
Parameter Range (select different range of sensors according to different water quality): pH 0.01～14.00pH Conductivity 0.01～30000μs/cm Turbidity 0.001～20.00NTU～4000NTU Residual chlorine / chlorine dioxide 0.001～ 5.000mg / L Dissolved oxygen 0.01～20.0mg/L Temperature 0.1～100.0°C System output 2 way RS485 MODBUS RTU; 1 way RS232 or DTU remote transmission Installation method Default vertical Process connection water sample inlet standard G1/2 Waste liquid discharge port Standard G1/2 Weight about 45KG Size 1470*500*400mm Water sample temperature 5～40°C Sample flow rate 400～600mL / min Protection level IP65 Power supply 100～240VAC or other customization Power consumption is about 3W