Features & Benefits
-
Easy Current Measurements
-
Probe Connects Directly to TDS Scope through TEKPROBE™ BNC Interface
-
Split Core Construction for Easy Circuit Connection
-
DC to 50 MHz Bandwidth
-
15 Amps DC + Peak AC Current
-
50 Amps Peak Pulse Current
-
500 × 10-6 Ampere-Sec Product
-
Safety Certified
Applications
-
Motor Drives
-
Switching Power Supplies
-
Disk Drive
-
Electronic Ballasts
-
Inverters
-
Avionics
TCP202 DC Coupled Current Probe
When combined with a Tektronix TDS oscilloscope, the TCP202 enables users to make direct readout DC and AC current measurements, resulting in accurately displayed and recorded measurements.
The TCP202 is a general-purpose probe for displaying and measuring current in electronic circuits. It is ideal for power supply and motor drive design, and for device testing.
Recommended Oscilloscopes
All TDS3000C and TDS5000B Series oscilloscopes. Also operational with TDS500, TDS600, and TDS700 Series, recommended with use of calibration fixture (015-0672-50) for best accuracy.
For TCP202 operation with other TDS400, TDS500, TDS600, and TDS700 Series oscilloscopes, the scale factor will be correct but measurement will be indicated as V instead of A.
Increase the Accuracy of Your Current Measurements
The accuracy of the TCP202 AC/DC current probe is normally 3%. However, the accuracy may be improved to 1% when the probe is calibrated on certain TDS oscilloscope models using the optional Calibrator P/N 015-0672-50. This improved accuracy is available on the TDS500, TDS600, and TDS700 Series, however the optional calibrator is only functional with the TDS500, TDS600, or TDS700 Series oscilloscope calibrator pins. The calibration fixture is not required for TDS3000C and TDS5000B Series oscilloscopes..
TCP202电流探头
– 放大器 DC～50MHz – 上升时间 ≤7.0ns
– 峰值脉冲 50A – 插入阻抗1MHz 0.07Ω
– 大ACp-p 40A – 大裸线电压 300V CATI
– 降至低于 N/A – 大导线直径 3.8mm
– 降至高于 20KHz – 电缆长度 - 2.2m
– 大DC 15A – **性
– Amp*S乘积 500×10-6 UL3111-1,CSA/010.1，EN61010-1
– 电流/格显示范围*1 EN61010-2-032,IEC61010-2-032
取决于使用的仪器
TCP202直流耦合电流探头
TCP202在与泰克TDS系列示波器一起使用时，用户可以直接测得DC和AC电流读数，准确地显示和记录测量结果。
TCP202是为测量和显示电路电流而设计的一种通用探头，它适合于电源和电机驱动器的设计工作，同时适合于器件测试。
产品特点:
简便地测量电流
通过TEKPROBE BNC接口，直接与TDS系列示波器相连
分芯芯结构，可以简便地接入电路
15安DC+峰值AC电流
50安峰值脉冲电流
**标准认证
产品应用:
电机驱动器
开关电源
磁盘驱动器
电子镇流器
逆电器
航空电子设备
订货信息:
TCP202 DC
耦合电流探头。
包括：说明书(070-9542-00)，参考手册(070-9543-02)。
Tektronix TCP202 电流探头,大DC 15A
- 温馨提示：为规避购买风险，建议您在购买前务必确认供应商资质与产品质量。
- 免责申明：以上内容为注册会员自行发布，若信息的真实性、合法性存在争议，平台将会监督协助处理，欢迎举报