产品 资讯
请输入产品名称
噪声分析仪 纺织检测仪器 Toc分析仪 PT-303红外测温仪 转矩测试仪 继电保护试验仪 定氮仪
首页 产品 专题 品牌 资料 展会 成功案例 网上展会
词多 效果好 就选易搜宝！
首页 >>> 产品目录 >>> HORIBA堀场
仪表展览网 >>> 展馆展区 >>> 光纤型化学药液浓度计 > 光纤型化学药液浓度计

产品资料

光纤型化学药液浓度计

光纤型化学药液浓度计
  • 如果您对该产品感兴趣的话，可以
  • 产品名称：光纤型化学药液浓度计
  • 产品型号：CS-600F
  • 产品展商：HORIBA堀场
  • 产品文档：无相关文档
简单介绍
产品描述

规格


Model CS-600F
Measurement
principle 		Absorption spectroscopic method
Calculation
principle 		Temperature compensation type multivariate analysis
Measurement target NH3/H2O2/H2O (reperesentative specification)
* Please contact HORIBA regarding other chemicals.
Measurement range NH3：0.00～1.20mass%、H2O2：0.00～5.50mass%、
H2O：93.3～100.0mass%
Repeatability NH3：±0.05mass%、H2O2：±10mass%、H2O：±1.0mass%
Chemical temperature: Within ±1℃/1 hour
Sample solution
temperature 		20〜80℃
Measurement cycle Approx. 3 seconds
LCD
display 		(1) Measured value (%)
(2) Concentration alarm (HH/H/L/LL)
(3) Error code (EXXX)
(4) Chemical temperature (°C)
(5) Serial/parallel communication status (P/S)
(6) The times of background correction failure (CXXX)
Key input (1) Concentration alarm setting (HH/H/L/LL)
(2) Concentration value shift
(3) Background correction
(4) Hot water correction
(5) Temperature dependent concentration shift
Parallel
input 		Input voltage of 12 V to 30 V DC by insulating with photo coupler
(1) Parallel concentration alarm output (On/Off)
(2) Switching chemical solution for measurement
(including background correction)
(3) Hot water correction
Parallel
output 		Transistor output (NPN open collector) by insulating with photo coupler
Maximum current when powered ON: 5 mA DC (no internal protective resistance)
Maximum voltage when powered OFF: 30 V DC
(1) Concentration alarm (ON at HH/H/L/LL alarm)
(2) Monitor error (OFF at error)
(3) Measuring (ON at measurement)
(4) Chemical solution type for measurement
(5) Echo to hot water correction input
(6) Warning (ON at occurred)
(7) Background correction status 8) Hot water correction status
Serial input RS-232C
(1) Request for readout of measurement data
(2) Select chemical solution type to be measured
(3) Hot water correction
Serial
output

RS-232C
(1) Measured data No.
(2) Chemical solution type
(3) Concentration value
(4) Error code
(5) Chemical temperature

Analog
output 		4 mA to 20 mA
In case of monitor error occurs, measurement is stopped or
invalid chemical range is selected, the signal output is fixed at 1.5 mA. The load resistor must be 500 Ω maximum.
Chemical solution
temperature input 		Terminal block inlet (terminal screw M3)
Platinum resistance temperature sensor: Pt100
(Three-conductor type, Class A) *Temperature sensor is not included.
Air
(for operation and purge) 		Connection port: 4 mm O.D. quick joint,
Pressure: 0.2 MPa ±0.02 Mpa
Power source 100～230V AC（Single-Phase）、50/60Hz
Power consumption Approx. 85 VA
(transient electric current at the time of the start is excluded)
Weight (Monitor) Approx. 3.6 kg
(Lamp unit) Approx. 2.8 kg
(Sample cell) Approx. 1.2 kg
Ambient temperature (Monitor, Lamp unit) 20°C to 30°C
(Sample cell, Optical fiber) 20°C to 35°C
(Sudden temperature change should be avoided, within ±1°C/1 hour)
Ambient humidity (Monitor, Lamp unit, Sample cell) 40% to 70%
(Should be no dew condensation)
Slanting angle at installation (Monitor, Lamp unit) within ±1°
Optical fiber Length: 5 m, minimum bend radius: R 150 mm

产品留言
标题
联系人
联系电话
内容
验证码
点击换一张
注：1.可以使用快捷键Alt+S或Ctrl+Enter发送信息!
2.如有必要,请您留下您的详细联系方式!
  • 温馨提示：为规避购买风险，建议您在购买前务必确认供应商资质与产品质量。
  • 免责申明：以上内容为注册会员自行发布，若信息的真实性、合法性存在争议，平台将会监督协助处理，欢迎举报
产品留言
标题
内容
联系人
联系电话
电子邮件
公司名称
联系地址
验证码
点击换一张
注：1.可以使用快捷键Alt+S或Ctrl+Enter发送信息!
2.如有必要,请您留下您的详细联系方式!