% O2 32% 36% 40% L/MIN 660 470 330 可连接式压缩机 N° 2 MCH 16 或 N° 2 MCH 18 N° 2 MCH 13 N° 1 MCH 8 或 N° 1 MCH 18
% O2
32%
36%
40%
L/MIN
660
470
330
可连接式压缩机
N° 2 MCH 16 或 N° 2 MCH 18
N° 2 MCH 13
N° 1 MCH 8 或 N° 1 MCH 18
特性
编号
SC000820
通流能力
1,070 L/分钟
驱动方式
三相电机
工作压力
13 bar
功率
7.5 KW (400 V - 50HZ)
尺寸（W x H x D）
119.5 x 126 x 85 cm 47” x 49.6” x 33.4”
净重约
256 Kg / 567.4 lbs
噪音LpA
70分贝
换油间隔
1,500小时
过滤器
油蒸汽浓度：0.003 PPM
The Coltri Nitrox LP 300 system consists of a rotary screw low pressure compressor that supplies air to a membrane system where oxygen rich air is separated away from nitrogen air. The oxygen rich air (nitrox) is then mixed and delivered to the intake of a high pressure compressor to be pumped into the tanks. The oxygen percentage is available from 32% to 40% by adjusting the regulated air input pressure. The system utilizes a 7.5 Kw, 1,070 l/m, 175 psig (13 bar) rotary screw compressor mounted with a three-phase electric motor in a silenced cabinet. STANDARD EQUIPMENT
The Coltri Nitrox LP 300 system consists of a rotary screw low pressure compressor that supplies air to a membrane system where oxygen rich air is separated away from nitrogen air. The oxygen rich air (nitrox) is then mixed and delivered to the intake of a high pressure compressor to be pumped into the tanks.
The oxygen percentage is available from 32% to 40% by adjusting the regulated air input pressure.
The system utilizes a 7.5 Kw, 1,070 l/m, 175 psig (13 bar) rotary screw compressor mounted with a three-phase electric motor in a silenced cabinet.
1
Th
沪公网安备31011502007614号
