产品详情
简单介绍：
honeywell 800系统XCL8010A控制器XCL8010A控制器模块可以与多种其他设备进行通讯，包括*多十六个PaneII/O的任意组合/或LonWorks设备（例如房间区域控制器）。总共允许使用381个数据点（所有类型，包括内部虚拟数据点和硬件数据点）。
详情介绍：
honeywell 800系统XCL8010A控制器的详细介绍
honeywell 800系统XCL8010A控制器
XCL8010A控制器模块可以与多种其他设备进行通讯，包括*多十六个PaneII/O的任意组合/或LonWorks设备（例如房间区域控制器）。
总共允许使用381个数据点（所有类型，包括内部虚拟数据点和硬件数据点）。一般情况下，HVAC应用程序可能需要相同数量的内部虚拟数据点和硬件数据点。
XCL8010A与PaneII/O模块之间*大可以相距40m的距离。
电气特性
工作电压
24 Vac, ± 20%，21…30 Vdc
Excel 800 系统（XCL8010 控制器模块、连接的Excel 800 I/O模块， 以及现场设备）可以由一个或多个外部变压器供电。
内存
• 128 kB EPROM
• 512 kB RAM
• 2 MB Flash EPROM ( 固件和应用程序)
看门狗
如果Excel 800 控制器模块运行不正常，看门狗输出将被激活。
微处理器
16-bit 处理器 (TMP 91 CY22). 22 MHz
内存与实时时钟备份
当设备掉电时，超级电容器会保存内存中的数据和实时时钟72个小时（运行环境友好，无须担心电池寿命问题）。
| XL800 控制器 XCL8010A | |
| XCL8010A | Excel 800 plant controller |
| Panle I/O | |
| XF821A | 8 analog input module (Panel) |
| XF822A | 8 analog output module (Panel) |
| XFR822A | 8 analog output module with override (Panel) |
| XF823A | 12 binary input module (Panel) |
| XF824A | 6 relay output module (Panel) |
| XFR824A | 6 relay output module with override (Panel) |
| XFR825A | Actuator output module with override (Panel) |
| Lon I/O | |
| XFL821A | 8 analog input module (LON) |
| XFL822A | 8 analog output module (LON) |
| XFLR822A | 8 analog output module with override (LON) |
| XFL823A | 12 binary input module (LON) |
| XFL824A | 6 relay output module (LON) |
| XFLR824A | 6 relay output module with override (LON) |
| Terminal socket Model | |
| XS821-22 | Terminal socket for analog input and output modules.The package includes 1 terminal socket, 1 connector bride and 1 swivel label. |
| XS823 | Terminal socket binary input modules.The package includes 1 terminal socket, 1 connector bride and 1 swivel label. |
| XS824-25 | Terminal socket relay output and floating output modules.The package includes 1 terminal socket, 1 connector bride, 1 cross connector and 1 swivel label. |
| Accessary (Optional) | |
| XS812 | Manual disconnector module for analog input, analog output and binary input. The manual disconnector is plugged between the terminal socket and the electronic module. It allows manual disconnection of individual signals. This is useful during start-up. |
| XS812RO | Manual disconnector module for relay output.The manual disconnector is plugged between the terminal socket and the electronic module. It allows manual disconnection of individual signals. This is useful during start-up. |
| XS814 | 10 auxiliary terminal blocks. The auxiliary terminal block is used for distribution of signals. It includes 2 blocks with 7 terminals which are connected to each other. |
| XS815 | 20 cross connectors (red in below figure) for connection of 6 relay commons.One cross connector is included in the terminal socket package. |
| XS817 | 40 cross connectors (red in below figure) for connection of 3 relay commons (used if voltage on relay 1…3 is different to voltage on relay 4…5) |
| XS816 | 10 bus bridges. One bus bridge is included in the terminal socket package. |
| XAL10 | 10 swivel labels. The swivel label is used to attach the application specific label printed with CARE.One swivel label is included in the terminal socket package. |
| XW882 | XI582 cable for Excel 800 (a combination of XW586 and XW582 can be also used). |
| XW885 | Download cable for Excel 800 (a combination of XW586 and XW585 can be also used). |
| XW884 | Adapter cable to use XW882 and XW885 with an XL500 controller |
