Different input configurations for standard signals
0/4 ... 20 mA, DC 0
... 5 V and DC 0 ... 10 V, are available, which can be selected via the terminal
configuration and by the selection of the input signal in the instrument
configuration.

Thereby alternatively transmitters with current or voltage signals can be
connected to the same unit. By means of the transmitter supply current loop
transmitters (2-wire) as well as 3-wire and 4-wire transmitters can be
operated.
The transmitter supply is galvanically isolated from the measuring
input.
There are two alarm outputs available.WIKA面板安装数显仪标准信号输入精度0.1 DI30 96*96*71mm指示器

In addition the indicator offers the possibility of sensor calibration and
linearisation with up to 10 points, thus enabling a further adaptation to many
different sensor signals and specific application requirements.

The standard features are completed by the adjustable sampling rate and
display time as well as the input offset for the correction of zero offsets or
sensor drifts.

Unauthorised changes of the set instrument parameters can be prevented by a
user-definable code on different user levels.

All the configuring and programming can be done using the front control
keys.