产品名称：办公椅旋转寿命试验机

办公椅旋转寿命试验机

BH-1052办公椅旋转寿命试验机主要功能：
Office chair rotating life testing machine is applicable to all office chairs with casters or chair wheels. It is used to evaluate the fatigue pressure and wear ability of casters and chair frames against the back and forth movement of chairs. A load (113 kg) is placed on the seat surface, and the clamping fixture is driven by the motor and synchronous belt to make the office chair or chair frame move back and forth to evaluate the wear-resistant life of the caster. The travel, speed and times can be set. Standard: BIFMA x 5.1 Clause 17 castor / chair frame durability test with foot chair.

办公椅旋转寿命试验机适用于所有带脚轮或椅轮的办公椅，评核脚轮及椅框对于抵受椅子前后移动所引起的疲劳压力及磨损能力。座面放置负重（113 公斤） ,夹持夹具用电机和同步带带动，使办公椅或椅框作前后往返运动,以评估脚轮之耐磨寿命 ,行程、速率及次数均可设定。标准：Bifma x 5.1 clause 17 带脚椅的脚轮/椅框耐久性试验。

 办公椅旋转寿命试验机主要技术参数：

 1、驱动方式：变频电机和同步带
 2、行程：762mm （+ 50 mm）
 3、速率：8～12次/min
 4、夹持具上下调节范围：80mm～500mm
 5、控制模式：PLC 和大型LCD显示屏
 6、起始点可自行调节
 7、电压：220V 单相 ，900W
 配件：承重底座1个 重23公斤内分9等分， 每方格内放置一个10公斤重砝码， 整体重量等于113 公斤。
8、底座障碍块可以移除， 用于平滑表面无障碍块测试。

 

Main technical parameters of office chair rotating life testing machine:



1. Driving mode: variable frequency motor and synchronous belt

2. Stroke: 762mm (+ 50 mm)

3. Rate: 8-12 times / min

4. Upper and lower adjustment range of clamp: 80mm ～ 500mm

5. Control mode: PLC and large LCD display

6. The starting point can be adjusted by itself

7. Voltage: 220V single phase, 900W

Accessories: one load-bearing base weighs 23 kg, which is divided into 9 equal parts. A 10 kg weight weight is placed in each square, and the overall weight is equal to 113 kg.

8. The base barrier can be removed for smooth surface barrier free block testing.