高性价比模拟运输振动台专业生产厂家

4、        設置好測試時間， 關掉時間開關重新啟動。

 
Simulation of the transport vibration table use
Is specially test electronics, electrical appliances, motor, household appliances, vehicle, aviation, communication, etc. Finished products or components of the degree of resistance to vibration. To understand all kinds of equipment in a certain frequency and amplitude of vibration, quality or structure, impact and change that export products to do compare transport vibration test of the product.
Transportation vibration table installed
1, this machine should be installed in a dry, solid, level off the site
2, good AC220V 50 hz
3, the location of the place the tester on the wall, and every other good rubber
4, ground leveling, make motor cooling mouth outwards, and control box
5, even a good motor line and control line
6, connected to the power supply should be equipped with master switch, host and control cabinet shall be reliable grounding
Transportation vibration table installed
1, check before starting the power supply should be lighter, right and reliable grounding
2, open the power switch, gently press the start button, motor start work
3, adjust the speed knob to the required speed (in no-load speed setting when needed, the measured object into the test bench.)
4, set up test time, off time to restart the switch.
5, put the items under test and clamping
6, unscrew the stop switch and start testing
7, after completion of test, automatic stop
8, remove the test items for inspection