包装重量1140千克
Board Handling Maximum circuit board dimension 584×508mm
Minimum circuit board dimension 75×50mm
Circuit board thickness 0.8~5.0
Maximum circuit board weight 4.5kg
Minimum circuit board edge surface clearance 5mm
Maximum upper clearance 15mm
Transfer speed Adjustable
Transfer height from the bottom 860~960mm
Circuit board retention Clamping circuit (front & back of the circuit)
Circuit board support Standalone mobile magnetic support pin
Printing Maximum printing area 559×498mm
Parameters Snap off speed 0.2~10mm / sec
Printing speed 5~200mm / sec
Printing pressure Less than 20kg
Print stroke 508mm
Stencil frame size 737×737mm(standard)
Applied compact frame Optional adapter used
Vision Scope of vision 10×10mm
Recognition marks Standard shape marks, Refer to SMEMA standard
Camera system A unit of mobile camera with two beams
Performance Alignment reproducibility ±0.025mm@6sigma(Cp should be 2.0 or more)
Already verified by the glass plate capability test
Cycle time / Standard spec. machine 16.2 sec. (printing time excluded)
Cycle time / High speed spec. machine 11 sec. (printing time excluded)
Circuit board retention Clamping circuit (front & back of the circuit board)
Power source etc. Power source 110 ~ 240V、50/60HZ(±10%)
Air 0.63Mpa SCFM clean air
High 1575mm
Depth 1448mm
Width(standard spec.) 1314mm
Width(high speed spec.) 1320mm、1524mm、1727mm
Device weight 700kg
Packing weight 1140kg
![](http://y1.yzimgs.com/ComFolder/536470//201403/ACCUFLEX%20MPM%20%E5%8D%B0%E5%88%B7%E6%9C%BA.jpg)