Servomex仕富梅微量氮分析仪K2001校准步骤中文操作手册说明书
1:General description微量氮分析仪概述
The SERVOPRO PLASMA Analyzer is an instrument for measuring 0 to 100 ppm nitrogen in argon . This analyzer is designed to work with pure gas.（K2001微量氮分析仪是用来测量纯氩中的微量氮的）
2:Sampling样品气体进入Servomex仕富梅微量氮分析仪K2001校准步骤中文操作手册说明书
The argon sample is introduced through a 1/8” tube Swagelok fitting at the rear of the cabinet . Never block the vent ,or permanent damage will result to flow transducer. Leave vent at atmospheric pressure（样品气的引入如下图。强调样品气出口一定不能有背压）
3:Power supply电源电压Servomex仕富梅微量氮分析仪K2001校准步骤中文操作手册说明书
The utility power supply must be stable and transient-free for a reliable operation of the analyzer. The system has two fuses . The analyzer has one power supply module delivering D.C. regulated voltage to the signal conditioning module, the microprocessor system display and the flow control module.（要求有稳定的电压保证仪表正常运行）
Sample stream selection system（可以接受的样品选择系统）
操作流程：
All analyzer function are controlled through different menu options. The following figures in this section show the overall menu structure.
At power on, the analyzer displays the MAIN MENU（上电开机后主菜单如下图）：
1: Configuration(F1配置菜单请参考下图)Servomex仕富梅微量氮分析仪K2001校准步骤中文操作手册说明书
a: F1-You have to decide whether or not to use “automatic ranging”(选择是否启用自动量程)。
b: You enter your desired sample flow value simply by using the number keys and confirming your value with the “E” key for enter . The flow unit is cc/m.（直接用键盘数字输入流量，单位是毫升每分钟）
c: F2-by pressing the “F2” key, the analog 4-20 mA output（选择4-20mA输出模式）。
由于篇幅有限，Servomex仕富梅微量氮分析仪K2001校准步骤只能先介绍到这里，后续的步骤你可以电话埃登威上海公司啊
Servomex仕富梅微量氮分析仪K2001校准步骤中文操作手册说明书
