The Spray Tester IPX 3/4is intended for use on specimens that will not fit within the diameter of the Tube Tester. The primary IEC tests include IPX3 and IPX4 protection against water spraying and splashing water.
Parameters: No. Item CX-IPX3/4 SPRAY NOZZLE 1 water supply water flow rate is 50~150kpa clean water without inclusion 2 spray nozzle parameters EXternal diameter:102mm Spherical diameter:S 75.5mm there is a miiddle hole and 24 holes in the internal circle which the included angle is 30 °. There 96 holes in the external circle of holes of which the included angle is 15°. 3 water flow 10L/min,Flow meter is adjustable 4 baffle removable 5 pressure gauge 0~0.25Mpa 6 site requirements dedicated IP waterproof test room The ground should be flat with illumination with good function of inflow and drainage. Product features: Pressure Gauge 0 - 1.6 bar Number of Holes 121 Diameter of Nozzle Holes 0.5 Material Spray nozzle make of brass Reference IEC60529, IEC60598-1, IEC 60335-1, IEC60745-1
粤公网安备 44030602001691号
