Product Description
IEC 60529 IPX1-8 IP Test Equipment IEC60529 Water Jet Test.IEC60529 Waterproof Test Equipment,ingress protection test IEC 60529 IPX1-8 IP Test Equipment.pdf
IEC 60529 IPX1/IPX2
Specification
1. Drip board area: 1000 X1000mm
2 .Outer size: 1100 X 1200 X 2500 mm (L*D*H)
3. Diameter of turntable: Φ 800mm plain perforated base with more perforations without boundaries
4. Diameter of perforation for turntable base: 0.8cm, equipped with British M8 screw
5. Hole Pitch for turntable base: 5cm
6. Aperture of drop : 0.4mm
7. Pitch-row(mm): 20 mm X 20 mm
8. Delivery rate: Manual(IPX1:1±0.5mm/min, IPX2: 3±0.5mm/min)
Preferred variable water delivery from 0.5mm / min to 10mm / min)
9 .Water flow meter required to indicate rainfall
10. Adjustable Height of drip board : 500~1800mm
11. Product under test (max): 50kg, dia. 800mm
12. Turntable speed: 1 RPM ( With Adjustable Speed)
13. Turntable height:600mm (Adjustable)
14. Turntable angle: 15°
16. Test time: 0~9999min
17. The drip hole has a protective plate to prevent accidental injury to the operator. For example, the installation of the sample may accidentally injure the operator's head,as shown in the picture below
IEC 60529 IPX3/IPX4
Specification
1 Oscillating tubes :R1600, R1400, R1200, R1000, R800, R600, R400 and R200 (mm)
2 Oscillate angle: 120º (IPX3), 350º (IPX4) or user-defined ( Adjustable angle)
3 Inner diameter of oscillating tube (mm) : 15
4 Hole Pitch : 50 mm
5 Diameter of blowhole: 0.4 mm
6 Water flow rate per hole : 0.07 L/ min ( Adjustable)
7 Turntable with adjustable speed: Φ800 mm
8 Height of turntable: 1000-1950 mm (Preferred)
9 Water pressure: Display
10 Product under test (max): 50 kg
11 Material of tube: SUS304 stainless steel (Preferred)
12 Duration of test : 0~9999min
13. The drip hole has a protective plate to prevent accidental injury to the operator.
IPX3 and IPX4 Spray Nozzle
Specification
1 Nozzle Diameter : 102mm
2 Sphere Diameter: 75.5mm
3 Hole No. : 121pcs
4 Hole Diameter : 0.5mm
5 Nozzle Material : Brass
6 Water Discharge : 10L/min±5%, adjustable
7 Pressure Gauge Range: 0~0.4Mpa
8. 121 holes of 0.5mm; 1 hole at the center, 1 inner circles of 12 holes at 30°pitch, 4 outer circles of 24 holes at 15°pitch
9 Flapper Detachable
IPX5 and IPX6 nozzle
Specification
1 Control system: PLC controlled
3 IPX5 nozzle diameter: 6.3 mm
4 IPX6 nozzle diameter: 12.5 mm
5 IPX5 water flow: 12.5±0.62 L/min
6 IPX6 water flow: 100±5 L/min
7 Water pressure: adjustment
8 Water flow control adjustable , measured with digital flow meter
9 Jet nozzle fixed type: hand-held
10. The center part of the main flow from the nozzle: 2.5m diameter of about 120 mm round;
11.Provide pipe and hose clamps.
IEC 60529 IPX7 and IPX1-8 water supply system
Specification
1.Volume: 100L
2.Big flow pump: 0-7cbm/h
3.Small flow pump: 0-3cbm/h
4.Flow control: digital flow meter
5.IPX6 flow control: manual
6.Water supply: 4 ways, stainless steel pipe
7.Filter: ceramic filter
8.Power supply: 220VAC 50Hz
9.Pressure control: electronic gauge(IPX4 spray nozzle)
10. Control system: PLC controlled
11. IPX7 sample lifting method: electric lift; sample maximum weight: 150KG
IEC 60529 IPX8
Technical Parameters:
1. Pressurized container: stainless steel tank, diameter 600mm, height 1000mm;
2, pressure adjustment range: 0.01 ~ 1.0Mpa (simulated depth of 1-100 meters);
3, pressurized system: stainless steel pump + inverter pressure;
4, pressure gauge accuracy 0.25, measuring range 1.6Mpa;
5, test time: 0-9999S;
6, the maximum limit pressure: 1. 2 Mpa;
7, pressure protection: safety valve;
8, power: AC380V, 50HZ, 3KW;
9. Remarks: There are various specifications for the pressure vessel size and pressure range, which can be customized.
