确定在绝缘线温度低的弯曲稳定性电缆达12.5毫米直径在冷态试验室或冷藏柜与心轴直径50毫米 according to IEC 60811-1-4 :1985 + Corr. 1986 + A1:1993 + A2:2001 § 8.1 and § 8.2 Fig. 1, VDE 0473 Part 811-1-4 :2002-09 § 8.1 and § 8.2 Fig. 1. Standard outfit: rigid trestle, driving shaft, with two bearings, with bush to take up the mandrel, with pivot for the actuating shaft, gear transmission 1:3, transmission shaft with two bearings, with pivot for the actuating shaft, counter bearing for the mandrel, with quick acting closure, guide bar, diameter 20 mm, distance to the mandrel adjustable, to 3 metal tubes, swivel-mounted, distance of the swivel axis from the mandrel axis approx. 270 mm, actuating shaft for attaching on the pivots, 450 mm long, with hand wheel. Design: Steel parts back-oxide-finished, all bearing bushes manufactured of brass, some small parts of stainless steel, total width maximally 235 mm, total length in direction of metal tube axis maximum 510 mm plus protruding sample,
香港奥德赛创科技有限公司
深圳市奥德赛创精密仪器有限公司
FAX: +86(755)26978981
Mobile: +86—
E-mail: scl@hkauto.com.cn