PTL摆锤冲击测试装置
用途：用来测试冲击能量从0.14J到达1.0J时机械的强度。
符合标准：
IEC 60068-2-75/1997-08§4.2，Tab.1和Tab.2 ，类似于Annex D
按照Table 1，注入元素Ø 18,5 mm，等同于质量0.25kg，
冲击能量和下落高度根据Table2
标准设备： 钢管摆手臂，外径9mm，管壁厚度0.5mm，钟摆有效长度1000±1mm
注入元素质量200g，球台形尼龙注入半径10mm,洛氏硬度85≤HRR≤100
基本框架: 高1270mm，宽200mm，有螺丝孔用于安装在墙壁上
延伸手臂:垂直可调，摆枢轴水平可调
延伸手臂，垂直可调, 有摆锤释放机制，下降高度规模水平可调
安装夹具：符合IEC60068-2-75/1997-08 Annex D Fig. D.3.
钢块：170mm×210mm×35mm，质量10kg，
夹具可向两边移动，沿矩形中心轴向胶合板旋转每次旋转90°
设计：基本框架涂有白色油漆，钢部分为棕色或镀镍，部分材料为不锈钢
型号：F 40.25
配件：
和标准IEC 60068-2-75/1997-08 Annex D Fif. D.4 相同
用来测试平整式样品，原材料为山毛榉木材，125mm×125mm×50mm ,钻孔直径65mm,置于规格为175mm×175mm×8mm的胶合板上。
型号： F 40.63 PTL Pendulum Impact-Test Apparatus to test the mechanical strength with impact energies of 0,14 J up to 1,0 J according to IEC 60068-2-75 :1997-08 § 4.2 Table 1 and Table 2, similar Annex D. Striking element according to Table 1, Ø 18.5 mm, equivalent mass 0.25 kg, impact energies and heights of fall according to Table 2. Standard Outfit: tubular pendulum arm of steel, external diameter 9 mm, wall thickness 0.5 mm, pendulum length 1 000 ±1 mm effective, striking element, mass 200 g, spherical segment-shaped polyamide insert R 10 mm, 85 ≤ HRR ≤ 100 Rockwell hardness, base frame, height 1 270 mm, width 200 mm, with bores for screws for mounting on a wall, extension arm, vertically adjustable, with horizontally adjustable pendulum pivot, extension arm, vertically adjustable, with release mechanism for the pendulum, scale for height of fall horizontally adjustable, Mounting Fixture according to IEC 60068-2-75:1997-08 Annex D Fig. D.3, with steel block 175 mm x 210 mm x 35 mm, mass 10 kg, turn able around its vertical axis and to be clamped with tommy screws, sheet of plywood 175 mm x 175 mm x 8 mm, in clamping rails moveable to the sides and to be turned in steps of 90° around its central axis rectangular to the sheet of plywood. Design: Base frame papyrus-white structure varnished, steel parts black-oxide-finished or made of stainless steel, Article No.: F 40.25 Accessory: Mounting Block similar to IEC 60068-2-75:1997-08 Annex D Fig. D.4, for testing flush-type specimens, made of beech 125 mm x 125 mm x 50 mm, with through bore diameter 65 mm, on plywood sheet 175 mm x 175 mm x 8 mm, Article No.: F 40.63
香港奥德赛创科技有限公司
深圳市奥德赛创精密仪器有限公司
FAX: +86(755)26978981
Mobile: +86—
E-mail: scl@hkauto.com.cn
www.hkautosz.com