PC4压力校准器 德国LR-CAL进口压力校准器快递供货
The PC4 is an appliance for verification and calibration of pressure sensors, pressure gauges, as well as pressure switches for low pressures
Technical Data:
1. Measurement principle: Inductive
2. Medium: non-aggressive gases
3. Wetted parts: Ni, Al, CuBe, PU
4. Linearity: 0.2% FS
5. Hysteresis: 0.1% max. FS
6. Long term stability ±0.5% per year (typical)
7. Sensor volume: appr. 3 ml
8. Volume increase: appr. 0,2 ml at nominal pressure
9. Pump: Displacement volume variable
10. Bellows (fine adjustm.): Displacement volume appr. 25 cm³ at 20 crankshaft rotations
11. Power supply: 9 V E-Block (Option: plug-inpower supply 230 VAC 50/60 Hz)
12. Current consumption: appr. 10 mA
13. Protection: 250 mAT
14. Supply influence: < 0,05%
15. Option: Analogue output 0...1 V (max. load resistance $2 KOhm)
16. Display: LCD 3 1/2 digits (12.5 mm); Option: LCD 4 1/2 digits (12.5 mm)
17. Response time: Adjustable 0.3 / 1 / 2 Seconds
18. Pressure connections: Diameter 6.6 mm x 1 mm (for flexible hose with 6 mm diam.)
19. Electrical connections: Power supply jack plugs for optional plug-in power supply
4 mm banana plugs for optional analogue output
20. Temperature influence Zeropoint ±0.03% FS / K; Span ±0.03% FS / K
21. Temperature ranges: specified range from +10°C to +40°C
22. Humidity: up to 80% relative humidity
23. Storage temperature: -10°C to +70°C
24. Housing: Bench housing in Aluminium 248 mm x 225 mm x 90 mm
25. Shock resistance: 1 g
26. Housing colour: Grey, Front green anodized
27. Protection class: III
28. Degree of protection: IP 30
29. Standardisation: EN 50081-1; EN 50081-2; EN 50082-1; EN 50082-2; EN 61010
30. Weight: appr. 2 kg
香港奥德赛创科技有限公司
深圳市奥德赛创精密仪器有限公司
FAX: +86(755)26978981
Mobile: +86—
E-mail: scl@hkauto.com.cn
www.hkautosz.com
- 温馨提示：为规避购买风险，建议您在购买前务必确认供应商资质与产品质量。
- 免责申明：以上内容为注册会员自行发布，若信息的真实性、合法性存在争议，平台将会监督协助处理，欢迎举报