企业信息
第10年
- 入驻时间： 2013-12-24
- 联系人：梁先生
- 电话：0514-89797910
-
联系时，请说明易展网看到的
- Email：13813192852@163.com
文章详情
**滑触线试运行交验项目
日期：2024-08-09 01:53
浏览次数：368
摘要：1、**滑触线及软电线安装完毕后，检查和清扫干净，用摇表摇测相间、及相对地的绝缘电阻，电阻值应大于0.5MΩ。并作记录。
1, safety sliding contact wire and soft wire after installation, check and clean, with the shake table shaking test phase, and the insulation resistance, the resistance value should begreater than 0.5M. And for the record.
2、滑接触器应按产品规定，安装牢固，沿**滑触线滑触可靠。在任何位置滑触器的中心线不应越出滑接线的边缘。
2, the sliding contactor shall be according to the ...
1、**滑触线及软电线安装完毕后，检查和清扫干净，用摇表摇测相间、及相对地的绝缘电阻，电阻值应大于0.5MΩ。并作记录。
1, safety sliding contact wire and soft wire after installation, check and clean, with the shake table shaking test phase, and the insulation resistance, the resistance value should begreater than 0.5M. And for the record.
2、滑接触器应按产品规定，安装牢固，沿**滑触线滑触可靠。在任何位置滑触器的中心线不应越出滑接线的边缘。
2, the sliding contactor shall be according to the product requirements, installation is firm, the security sliding touch line sliding contact reliability. In any position in thesliding contact the center line should not be beyond the edge of the sliding connection.
3、检测符合要求送电空载运行。检查无异常现象后，再带负荷运行，**滑触线滑触器在运行中与滑接线全程滑接平滑，无较大火花和异常现象后，交建设单位使用。
3, the detection to meet the requirements of power load operation. Check no abnormal phenomena, then run with load, security sliding touch line slide device in operation andtrolley wire sliding joint smooth, no great spark and abnormal phenomenon, the constructionunits.
4、**滑触线验收时应提交以下资料：
4, security sliding touch line acceptance shall submit the following documents:
交工验收单，变更洽商记录、产品合格证和技术文件。
Acceptance of single, change negotiation records, product certification and technical documents.
安装记录、测试及试运行记录。
Test run record record of installation, testing and.
1, safety sliding contact wire and soft wire after installation, check and clean, with the shake table shaking test phase, and the insulation resistance, the resistance value should begreater than 0.5M. And for the record.
2、滑接触器应按产品规定，安装牢固，沿**滑触线滑触可靠。在任何位置滑触器的中心线不应越出滑接线的边缘。
2, the sliding contactor shall be according to the product requirements, installation is firm, the security sliding touch line sliding contact reliability. In any position in thesliding contact the center line should not be beyond the edge of the sliding connection.
3、检测符合要求送电空载运行。检查无异常现象后，再带负荷运行，**滑触线滑触器在运行中与滑接线全程滑接平滑，无较大火花和异常现象后，交建设单位使用。
3, the detection to meet the requirements of power load operation. Check no abnormal phenomena, then run with load, security sliding touch line slide device in operation andtrolley wire sliding joint smooth, no great spark and abnormal phenomenon, the constructionunits.
4、**滑触线验收时应提交以下资料：
4, security sliding touch line acceptance shall submit the following documents:
交工验收单，变更洽商记录、产品合格证和技术文件。
Acceptance of single, change negotiation records, product certification and technical documents.
安装记录、测试及试运行记录。
Test run record record of installation, testing and.