PTL转盘防水测试仪

产品名称：PTL转盘防水测试仪

产品品牌：德国PTL

产品用途：PTL转盘防水测试仪用于转动样本来确定防水

参照标准：

IEC 60335-1 / 1991-04 &15.1.1,

IEC 60529 / 1989-11 &14.1 Table VIII Fig. 4,

IEC 60598-1 / 1996-11 ?9.2.4 and & 9.2.5 Fig. 7, IEC 60947-1 / 1988 &C.8 Fig. C.4,

EN 60529 / 1991 & 14.1 Table VIII Fig. 4,

DIN 40 050 Part 9 / 1993-05 & 7.4 Table 8 Fig. 4, VDE 0470 Part 1 / 1992-11 &14.1 Table 8 Fig. 4

Standard Outfit:

1    tabletop with apron, circular, pivoted on a ball bearing turning rim, height of tabletop above    floor approx. 220 mm,

1    frame with AC geared motor, with additional gear reduction to 1 + 0,1 rpm, with 4 height adjustable caster wheels, 2 of them lockable.

 

Design: tabletop with apron of aluminum, frame of steel hot-dip galvanized and papyrus white structure varnished, for connection to 230 V 50 Hz (other voltages on request), including a 3 m long hard wearing connection cable with waterproof CEE-plug,

　table                carrying            Article

diameter:                capacity:             No.:

　730 mm               150 kg             P 17.37

　850 mm               150 kg             P 17.38

 1050 mm               150 kg             P 17.39

 

Additional Outfit:

 

PTL Swivel Accessory Unit

to change over from rotatory operation to swiveling operation with reverse of direction after approx. 350? absolutely necessary for specimens with connected cable,                                                        Article No.: P 17.44

Attachment :

 

PTL Telescope Support

for fitting on a turntable, to hold the specimens

Standard Outfit :

1 tubular stand, with mounting flange,

2 telescopic tubes, to clamp by tommy screws,

1 support grid, 270 mm x 180 mm, ±30 ° inclinable, to clamp by a tommy screw.

 

Design: all parts of stainless steel (material 1.4301 or 1.4305), screws of stainless steel, height of support grid above tabletop adjustable - unless otherwise agreed upon - from approx. 600 mm to 1200 mm, carrying capacity maximally 50 kg,   

 

PTL Turntable with Telescope Support, to be adapted between eccentricity 100 mm and inclination of the support grid by 15 ° in 4 directions, for 2,5 min each, turned by 90 °each, including automatic control, according to e. g. EN 60529 / 1991 &14.2.2 Fig. 3:on request