IEC 60811-2-1下载文件详细资料

本页面标准信息均来源于网络收集，或由参与标准制定的供应商提供，只作为参考使用，为确保测试结果的准确性、节省您的时间，如需IEC 60811-2-1测试标准标准详细信息或IEC 60811-2-1测试标准具体测试方法，欢迎致电与我们技术人员联系或给我们留言，我们将为您相关的技术支持。

IEC 60811-2-1标准简介

IEC 60811-2-1是关于《电缆和光缆的绝缘和护套材料的通用试验方法第2-1部分》，由国际标准技术委员会20：电线电缆，该版本在原先IEC 60811第二版（1998）的基础上修订。

IEC 60811-2-1是关于用于配电光电缆和电信电缆，绝缘聚合物和护套材料的试验方法，包括在船舶和海上应用中使用的电缆。

该标准给出了适用于弹性体化合物的耐臭氧性试验、热定型试验和矿物油浸试验方法。

IEC 60811-2-1英文原文摘录

1.General

1.1 Scope

This standard specifies the test methods to be used for testing polymeric insulating and sheathing materials of electric and optical cables for power distribution and telecommunications, including cables used on ships and in offshore applications.

This standard gives the methods for the ozone resistance test, hot set test and mineral oil immersion test, which apply to elastomeric compounds.

1.2 Normative references

The following normative documents contain provisions which, through reference in this text,constitute provisions of this part of IEC 60811. At the time of publication, the editions indicated were valid. All normative documents are subject to revision, and parties to agreements based on this part of IEC 60811 are encouraged to investigate the possibility of applying the most recent editions of the normative documents indicated below. Members of IEC and ISO maintain registers of currently valid International Standards.

IEC 60811-1-1:1993, Common test methods for insulating and sheathing materials of electric cables – Part 1: Methods for general application – Section 1: Measurement of thickness and overall dimensions – Tests for determining the mechanical properties

IEC 60811-1-2:1985, Common test methods for insulating and sheathing materials of electric cables – Part 1: Methods for general application – Section Two: Thermal ageing methods

2 Test values

Full test conditions (such as temperatures, durations, etc.) and full test requirements are not specified in this standard; it is intended that they should be specified by the standard dealing with the relevant type of cable.

Any test requirements which are given in this standard may be modified by the relevant cable standard to suit the needs of a particular type of cable.

下载文件详细资料
文件名称：	IEC 60811-2-1
公司名称：	北京宏展仪器有限公司
下载次数：	1239
文件详细说明：
本页面标准信息均来源于网络收集，或由参与标准制定的供应商提供，只作为参考使用，为确保测试结果的准确性、节省您的时间，如需IEC 60811-2-1测试标准标准详细信息或IEC 60811-2-1测试标准具体测试方法，欢迎致电与我们技术人员联系或给我们留言，我们将为您相关的技术支持。 IEC 60811-2-1标准简介 IEC 60811-2-1是关于《电缆和光缆的绝缘和护套材料的通用试验方法第2-1部分》，由国际标准技术委员会20：电线电缆，该版本在原先IEC 60811第二版（1998）的基础上修订。 IEC 60811-2-1是关于用于配电光电缆和电信电缆，绝缘聚合物和护套材料的试验方法，包括在船舶和海上应用中使用的电缆。该标准给出了适用于弹性体化合物的耐臭氧性试验、热定型试验和矿物油浸试验方法。 IEC 60811-2-1英文原文摘录 1.General 1.1 Scope This standard specifies the test methods to be used for testing polymeric insulating and sheathing materials of electric and optical cables for power distribution and telecommunications, including cables used on ships and in offshore applications. This standard gives the methods for the ozone resistance test, hot set test and mineral oil immersion test, which apply to elastomeric compounds. 1.2 Normative references The following normative documents contain provisions which, through reference in this text,constitute provisions of this part of IEC 60811. At the time of publication, the editions indicated were valid. All normative documents are subject to revision, and parties to agreements based on this part of IEC 60811 are encouraged to investigate the possibility of applying the most recent editions of the normative documents indicated below. Members of IEC and ISO maintain registers of currently valid International Standards. IEC 60811-1-1:1993, Common test methods for insulating and sheathing materials of electric cables – Part 1: Methods for general application – Section 1: Measurement of thickness and overall dimensions – Tests for determining the mechanical properties IEC 60811-1-2:1985, Common test methods for insulating and sheathing materials of electric cables – Part 1: Methods for general application – Section Two: Thermal ageing methods ISO 1817:1999, Rubber, vulcanized – Determination of the effect of liquids 2 Test values Full test conditions (such as temperatures, durations, etc.) and full test requirements are not specified in this standard; it is intended that they should be specified by the standard dealing with the relevant type of cable. Any test requirements which are given in this standard may be modified by the relevant cable standard to suit the needs of a particular type of cable.
文件下载（右键文件另存为）