冲击台 Shock Tester
一、相关标准测试要求 Test requirements
1.IEC62133-2012
2.UL1642
3.UN38.3
4.GB31241-2014
二、主要技术参数 Main Technical Parameters
型号 Model
P-IS200
额定负载 Specified load
10 kg(含夹具、试验件)fixtures, test pieces are included
台面尺寸(长×宽)
Bench Dimension
200×200 mm
冲击波形Pulse Wave:
半正弦波Half sinusoidal wave
峰值加速度(半正弦波)
Shock Impact Peak Acceleration
150~15000 m/s2
脉冲持续时间(半正弦波)
Pulse Duration Time:
0.6~20ms
外形尺寸(长×宽×高)
External Dimension
1000mm×500mm×2700mm
设备重量 Weight
1500 kg
冲击形式Impact form
自由跌落Free fall
*大跌落高度Max. drop height
1500mm
电 源 Power Supply
三相380V,50/60 Hz Three phase 380V,50/60 Hz
液压源Hydraulic source
随机配置 With the equipment
环境条件
温度(℃)Temperature
0~40
Condition
湿度(25℃)Humidity
<85%
可靠性
reliability
平均无故障积累工作时间≥1000h;
Average failure-free accumulation working time ≥ 1000h;
半正弦波形发生器连续冲击次数不小于5000次;
The half-sine waveform generator has no less than 5000 consecutive impacts;
半正弦波形发生器的在干净、常温环境下的存储时间不小于5年。
The half-sine waveform generators have a storage time of no less than 5 years in a clean, room temperature environment.
测控系统
Testing system
ShockDAQ冲击、碰撞测量控制系统
Impact, collision measurement control system
适用标准
Usage standard
GJB150、GJB360、GJB548、GB/T2423、GJB1217、JJG497、GIEC68-2-27
检定标准
Testing standard
加速度幅值、脉宽、均匀度和横向运动比满足JJG541-88的要求。
Acceleration amplitude, pulse width, uniformity, and lateral motion ratio meet the requirements of JJG541-88.
粤公网安备 44190002003872号