- 如果您对该产品感兴趣的话，可以
- 产品名称：日本油研方向控制阀造型参数，原装YUKEN控制阀
- 产品型号：DSG-01-3C2-A240-N1-50
- 产品展商：YUKEN-油研
- 产品文档：无相关文档
- 发布时间：2017-06-12
- 在线询价
简单介绍
日本油研方向控制阀造型参数，原装YUKEN控制阀
很*的完成。
一定要在下列规定的条件下使用液压油：surge pressure in it. Be sure to keep the end of the tank line
pipe below the oil level. As the solenoThese DSG-005 series solenoid operated directional valves are the products
newly developed as a "Mini-series". Compared with DSG-01 series,
the valves are much more compactly manufactured but enjoy a maximum
opera
日本油研方向控制阀造型参数，原装Y
产品描述
日本油研方向控制阀造型参数，原装YUKEN控制阀
上海乾拓贸易有限公司
企业QQ：
电话；
手机；（微信）
邮箱；@163.com
联系人；杨婷玉
地址：上海市嘉定区江桥嘉涌路99弄6号713室
mounting posture.
Solenoid Energisation
When energising one solenoid, be sure to de-energise
another solenoid beforehand.
Tank Port
Do not connect the tank port to any pipe line having a
有一个很*的完成。
一定要在下列规定的条件下使用液压油：surge pressure in it. Be sure to keep the end of the tank line
pipe below the oil level. As the solenoThese DSG-005 series solenoid operated directional valves are the products
newly developed as a "Mini-series". Compared with DSG-01 series,
the valves are much more compactly manufactured but enjoy a maximum
operating pressure of 25 MPa (3630 PSI) and a maximum flow rate of
10 L/min (2.6 U.S.GPM), while contributing further to a space saving
requirement. Moreover, using
以使用下表中列出的液压油类型。
安装螺栓
包括下表中的四个内六角头螺栓Mounting Posture
For any model, there are no restrictions regarding theids are of wet type。
子板可用。 从上表中**子板号。 当不使用子板时，配套表面应该
粘度：20-200mm 2 / s（100-930SUU），温度：-15?+ 60℃（5?140°F）。
**的粘度和油温
必须谨慎，以保持对可能导致的液压油污染的控制
故障和缩短阀门的使用寿命。 请保持学位
日本油研方向控制阀造型参数，原装YUKEN控制阀
