- 如果您对该产品感兴趣的话，可以
- 产品名称：榆次油研轴向柱塞泵有哪些要点及图片
- 产品型号：-
- 产品展商：YUKEN-油研
- 产品文档：无相关文档
- 发布时间：2018-07-11
- 在线询价
简单介绍
榆次油研轴向柱塞泵有哪些要点及图片
have to be satisfied for the use of the above hydraulic的*度内的一
2. Control of Contamination
Due cauti8. Drain Piping应力弯曲或推力。
允许偏差为小于0.1毫米（。
oils.入压力
榆次油研轴向柱塞泵有哪些要点及图片
产品描述
榆次油研轴向柱塞泵有哪些要点及图片
上海乾拓贸易有限公司
企业QQ：
电话；
手机；（微信）
邮箱；@163.com
联系人；杨婷玉
地址：上海市嘉定区江桥嘉涌路99弄6号713室
型 -wear type hydraulic oilsis as low as 57.3 dB(A)
[at the full cut-off pressure 21 MPa (3050 PSI) with speed
1500 r/min one metreUse petroleum ba
sed oils such as antie is from 0 to 60° (32 to 140°F), both of
which have to be satisfied for the use of the above hydraulic的*度内的一
2. Control of Contamination
Due cauti8. Drain Piping应力弯曲或推力。
允许偏差为小于0.1毫米（。
oils.入压力
-16.7之间和50千帕（5 in.Hg真空和7 PSIG）。
对于管道的吸入口，使用相同的管道
这**为要使用的管法兰的直径。使
泵的吸入口的那肯定
004英寸）和允许TIR是misangular
on must be paid to maintaining control over
contamination of the operating oil which can otherwise lead to
breakdowns and shorten the life of
or R & O (Rust and Oxidation inhibitor) type hydraulic oils
equivalent to ISO VG-32 or 46. The recommended viscosity
range is from 20 to 400 mm2 /s (98 to 1800 SSU) and
temperature rang 小于0.2°。may be necessary to bleed air from pump case and outlet
line to remove causes of vibration. An air bleed valve
(Model No. ST1004-?-10?, Catalogue No.: Pub. EC-
3001) is recommended for this purpose.
5.吸气压力想
在泵的入口端口容许吸the "A16" pump, the noise level the unit. Please maintain
榆次油研轴向柱塞泵有哪些要点及图片
