**康茂盛拉杆型气缸,供应camozzi拉杆型气缸电气特性

**康茂盛拉杆型气缸,供应camozzi拉杆型气缸电气特性
气缸是一种双活塞的气动滑座。气缸与导向装置设计在一起
结构形式 紧凑型，磁传，QXT 采用青铜粉末冶金导向套，QXB 采用滚珠直线导轨导向套
The moving parts can withstand large radial loads and moments.
Dual piston rod design can increase the output of the cylinder twice,
Very suitable for installation in a small space, and the need for greater output force, the load to be guided workplace.
The guide sleeve of the cylinder has two forms: bronze powder metallurgy guide sleeve (QXT) and ball linear guide guide (QXB).
When the radial load is large, the general use of QXT type;
and when the movement accuracy is high, and the use of frequency is recommended when the use of QXB type.
行程 10 ÷ 100 mm
The cylinder is a double piston pneumatic slide. The cylinder is designed with the guide
Compact form, magnetic transmission, QXT bronze powder metallurgy guide sleeve, QXB ball linear guide guide sleeve
Working mode double effect
Material Anodized Aluminum Alloy Base and Fixing Plate, Polyurethane Seal,
Roll AISI 303 Stainless Steel Piston Rod (QXT) or C50 Hardened Steel Piston Rod (QXB)
工作压力 1 ÷ 10 bar
介质 洁净空气，不需润滑。如使用了油雾润滑，应不间断的使用油雾润滑（建议使用 ISO VG32 润滑油），
移动部件可承受较大的径向负载和力矩。双活塞杆的设计可使气缸的输出力提*一倍，
很适合安装在较小的空间，且需要较大输出力、负载需被导向的工作场合。
气缸的导向套有两种形式：青铜粉末冶金导向套（QXT）和滚珠直线导轨导向套（QXB）。
当径向负载较大时，一般采用 QXT 型；而当运动精度较*，且使用频率较大时建议采用 QXB 型。
The mounting method utilizes the threaded holes on the base
Stroke 10 ÷ 100 mm
Operating temperature 0 ÷ 80 ° C (dry air at -20 ° C)
Speed 50 ÷ 500 mm / s (no load)
Working pressure 1 ÷ 10 bar
Medium clean air without lubrication. Such as the use of oil mist lubrication,
should be used without interruption of oil mist lubrication (recommended the use of ISO VG32 lubricants),

**康茂盛拉杆型气缸,供应camozzi拉杆型气缸电气特性