- 如果您对该产品感兴趣的话，可以
- 产品名称：宝德进口2位3通通用电磁阀，德国BURKERT电磁阀**
- 产品型号：00001251
- 产品展商：BURKERT
- 产品文档：无相关文档
- 发布时间：2017-09-27
- 在线询价
简单介绍
宝德进口2位3通通用电磁阀，德国BURKERT电磁阀**
The solenoid coils are moulded with a chemically resistant epoxy.
The 0121 is equipped with manual override for commissioning and testing. For reduced energy requirements,
all coils can be delivered with electronic power reduction or as an impulse version.
The switching status can be indicated with position feedback as a binary or NAMUR
宝德进口2位3通通用电磁阀，德国BURKERT
产品描述
宝德进口2位3通通用电磁阀，德国BURKERT电磁阀**
上海乾拓贸易有限公司
企业QQ：
电话；
手机；（微信）
邮箱；@163.com
地址：上海市嘉定区江桥嘉涌路99弄6号713室
免维护转动衔铁技术
防震线圈
The housing offering includes stainless steel (316L), PTFE, and PVC versions.
The solenoid coils are moulded with a chemically resistant epoxy.
The 0121 is equipped with manual override for commissioning and testing. For reduced energy requirements,
all coils can be delivered with electronic power reduction or as an impulse version.
The switching status can be indicated with position feedback as a binary or NAMUR signal.
• Service-friendly, durable manual override
• Explosion proof version
-30 to +50 °C FKM: -10 to +50 °C FFKM: -10 to +50 °C Ambient temperature Max. +50 °C Viscosity Max.
37 mm2/s Voltages 24 V 50 Hz; 110 V 50 Hz; 230 V 50 Hz; 120 V 60 Hz; 240 V 60 Hz; 12 V DC; 24 V DC;
(Further voltages on request) Voltage tolerance +/- 10% Cycling rate max. 100/min with AC max.
10/min for UC (high-capacity electronic) Duty cycle for VA 100% Duty cycle bei PVDF,
PP and PTFE 40% ED (60% intermittent operation) in 10 min bei 8 Wversion 100% ED for 5 W-version
or high-capacity electronic Duty cycle for PVC with PVC 10% ED (10 min) 100% ED for version with high-capacity electronic
与 DIN EN 17301-803 A 型电缆插头配套，该阀的安全防护等级为 IP65/67，不锈钢或塑料阀体式 NEMA 4X。
直动式介质隔离电磁阀，通径 DN 8
The 0121 valve is a direct-acting, media-separated pivoted armature valve.
It is available in 3/2- and 2/2-way versions. As a 3/2-way version,
it can be used as a distributor or mixing valve.
直动式、介质隔离的转动衔铁电磁阀。两位两通和两位三通式。
两位三通式可用作分配阀或混合阀。根据不同的应用，可以选择各种膜片材质和工作方式。
In combination with a plug in accordance with DIN EN 17301-803 Form A,
the valves satisfy protection class IP65/67
– in combination with a stainless steel or plastic housing NEMA 4X.
Technical data Orifi ce DN2.0 to 8.0 Available housing materials PTFE PVC (resistant acc. to DIN 8062,
8061) PP (Polypropylen) PVDF Stainless steel 1.4401 Seal materials FKM / FFKM / EPDM Medium for FKM
Oxydizing acids and substances, hot oils with additives, salt solutions,
waste gases Aggressive fl uids, hot air, hot oils, Aromate, ether,
适用于腐蚀性碱液和酸液
手动开关结构坚固、使用方便
• Direct-acting, media-separated valve with diameter of up to DN 8
• Maintenance-free pivoted armature technology
• Vibration-proof, block screwed coil system
阀体材质为不锈钢（316L)、PTFE、和 PVC。电磁线圈采用耐化学腐蚀的环氧树脂封装。
0121 型配备了手动开关，可用于调试和测试。如有节能要求，所有线圈都可提供节电式，或脉冲式。
开关状态可以通过位置反馈以二进制或NAMUR信号显示。
Esther, ketones (please note Bürkert chemical resistance chart). Alkalis,
acids up to medium concentration, alkaline washing- and bleaching lyes All Materials For more detailed
information please consult the resistance chart Medium temperature for body material PVDF oder PP EPDM:
-30 to +70 °C FKM: -10 to +70 °C FFKM: -10 to +70 °C Medium temperature for body material PTFE or VA EPDM:
-30 to +90 °C FKM: -10 to +90 °C FFKM: -10 to +90 °C Medium temperature for body material PVC EPDM:
Various diaphragm material combinations and methods of operation are available depending on the application.
宝德进口2位3通通用电磁阀，德国BURKERT电磁阀**
