介绍德国BURKERT直动式两位两通柱塞电磁阀

介绍德国BURKERT直动式两位两通柱塞电磁阀
上海乾拓贸易有限公司
企业QQ：
电话；
手机；（微信）
邮箱；@163.com
地址：上海市嘉定区江桥嘉涌路99弄6号713室
Power ratings Orifi ce [mm] Power ratings Inrush AC Hold AC (hot coil) DC (hot/cold coil) [VA] [VA] [W] [W] 1.0 -12.0 105 37 16 16 / 21
Response times [ms]: Measured at valve outlet at 6 bar and +20 °C Opening: pressure build-up 0 to 90%, closing: pressure relief 100 to 10%
Response times Orifi ce [mm] Response times AC     Response times DC Opening [ms] Closing [ms] Opening [ms] Closing [ms] 1.0 -12.0 10-30 20-30 20-80 20-30
采用焊接铁心导管，提*密封**
防爆式
Direct-acting 2/2-way plunger valve
Valve 6027 is a direct-acting plunger valve.
直动式柱塞电磁阀。止动器与柱塞导管焊接在一起，以提*耐压性和密封性。
• Increased leak-tightness with welded plunger    guiding tube
• Explosion proof versions
Technical data Port connection G 1/4, G 3/8, G 1/2 (RC on request) Orifi ce DN 1.0 - 12.0 Body material Brass or stainless steel
1.4404 (316L) Coil material Epoxy Coil insulation class Epoxy class H Seal material
FKM, PTFE / FKM and PTFE / PEEK for high temperatures (EPDM on request) Medium Medium resistance according to material combination Vacuum,
Type 2508 Cable plug
Stainless steel body
2/2-way valve, NO
根据不同的应用，可以选择各种密封材质。电磁线圈采用耐化学腐蚀的环氧树脂封装。
FKM/FKM -10  to +140°C FKM/FKM -10  to +100°C PEEK/FKM -10  to +80°C PEEK/FKM -10  to + 80°C PTFE/PEEK -40  to +140°C
PTFE/PEEK -40  to +100°C NBR/NBR -10  to +80°C Voltage tolerance ±10% Duty cycle / single valve 100% continuous rating Electrical connection
 acc. to DIN EN 175301-803 Form A for cable plug Type 2508 (see accessories ordering chart)
Protection class IP65 with Cable Plug Installation As required, preferably with actuator upright
2/2-way valve, NC
The coils are moulded with chemically resistant epoxy.
and medium temperature Seat seal/external seal Circuit function Normally Closed (NC) Circuit function Normally Open (NO)
Circuit function B
Type 6027 Compact can be combined with…
与 DIN EN 17301-803 A 型电缆插头配套，该阀的安全防护等级为 IP65，不锈钢阀体式 NEMA 4X。
直动式电磁阀，通径 DN 12
防震线圈
 neutral gases and liquids (e.g. compressed air, town gas, natural gas, water, hydraulic oil, petrol)
and slightly aggressive medium Hot liquids and steam Seal material combination
The stopper and plunger guiding tube are welded together to enhance pressure resistance and leaktightness.
 Various seal material combinations are available depending on the application.
• Direct-acting, powerful valve with diameter of  up to DN 12
• Vibration-proof, bolted coil system
Kick and Drop’ electronics are available for overexcitation (plug 2511) for the reduction of electrical power consumption during operation.
An optional sliding ring bearing increases the service life with dry gases. Special seal technology is used for high-pressure applications.
 In combination with a plug in accordance with DIN EN 17301-803 Form A, the valves satisfy protection class IP65. Stainless steel valves satisfy NEMA 4X.
Circuit function A
具有带“kick and drop”电子线路式（2511插头），用于过励磁和降低功耗。
可选滑环轴承以提*使用寿命。采用专用密封技术，使该阀适用于*压应用。

介绍德国BURKERT直动式两位两通柱塞电磁阀