- 如果您对该产品感兴趣的话，可以
- 产品名称：概述SMC摆动气缸,SMC摆动气缸原理
- 产品型号：
- 产品展商：SMC
- 产品文档：无相关文档
- 发布时间：2018-09-02
- 在线询价
简单介绍
概述SMC摆动气缸,SMC摆动气缸原理
• Applicable shaft type: W
• Equal dimensions are indicated by the same marker.
(If not specifying dimension C2, indicate “∗” instead.)
概述SMC摆动气缸,SMC摆动气缸原理
产品描述
概述SMC摆动气缸,SMC摆动气缸原理
Applicable to single vane type only
A special end is machined onto both the long and short shafts, and a through-hole is
drilled into both shafts. Female threads are machined into the through-holes, whose
diameter is equivalent to the diameter of the pilot holes.
• Not available for size 10.
• The maximum dimension L1 is, as
a rule, twice the thread size.
(Example) For M5: L1 max. = 10 mm
However, for M5 on the short shaft of T shaft
: L1 max. = 7.5 mm
• Applicable shaft types: K, T
• Equal dimensions are indicated by the same
marker.
磁性开关安装位置可以移动到任意位置。
可直接安装。
Dimension “L” of the actuators is provided in the
table below for JIS standard hexagon socket
head cap screws. If these types of screw are
used, their heads will fit in the mounting hole.
配管方向有缸体侧面和轴向两种。(带有磁性开关和角度调整的配管方向只能选择缸体侧面)
低使用压力：0.2MPa(缸径10)0.15MPa(缸径15～40)
带角度调整的可以调整到任意角度。
附带磁性开关(CDRB2系列：CDRB2□W、CDRB2□WU)
The short shaft can be further shortened by machining it
into a stepped round shaft with male threads.
(If shortening the shaft is not required, indicate “∗” for dimension Y.)
• Applicable shaft type: W
• Equal dimensions are indicated by the same marker.
(If not specifying dimension C2, indicate “∗” instead.)
概述SMC摆动气缸,SMC摆动气缸原理
